XRAH-10J_07 Datasheet, PDF (2/7 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
2.5 Vdc Input
0.9 Vdc - 1.65 Vdc/10 A Output
Output Specifications
Parameter
Output Voltage Set Point
Line Regulation
Load Regulation
Regulation Over Temperature
(-40 °C to +85 °C)
Output Current
Min
Vo=1.5 V
Vo=1.2 V
Vo=1.0 V
1.470 V
1.176 V
0.980 V
Vo=1.5 V
-
Vo=1.2 V
-
Vo=1.0 V
-
Vo=1.5 V
-
Vo=1.2 V
-
Vo=1.0 V
-
Vo=1.5 V
-
Vo=1.2 V
-
Vo=1.0 V
-
0A
Typ
1.5 V
1.2 V
1.0 V
2 mV
2 mV
2 mV
5 mV
5 mV
5 mV
13 mV
10 mV
9 mV
-
Max
1.530 V
1.224 V
1.020 V
5 mV
5 mV
5 mV
10 mV
10 mV
10 mV
Notes
Test conditions:
Vin=2.5 V, Io=full load
25 mV
20 mV
20 mV
10 A
Current Limit Threshold
Short Circuit Surge Transient
Ripple and Noise (rms)
Ripple and Noise (pk-pk)
Turn on Time
Vo=1.5 V
Vo=1.2 V
Vo=1.0 V
13 A
-
-
-
-
-
-
-
0.5 A²s
0.5 A²s
0.5 A²s
15 mV
50 mV
1 mS
25 A
1.5 A²s
1.5 A²s
1.5 A²s
25 mV
100 mV
2 mS
Test conditions:
0-20 MHz BW, with a 1 uF
ceramic capacitor at the
output.
Overshoot at Turn on
Output Capacitance
-
0%
3%
220 uF
-
4000 uF
Transient Response
50% ~ 100%
Overshoot
-
Max Load
Settling Time
-
VO=1.5 V
100% ~ 50%
Overshoot
-
Max Load
Settling Time
-
50% ~ 100%
Overshoot
-
Max Load
Settling Time
-
VO=1.2 V
100% ~ 50%
Overshoot
-
Max Load
Settling Time
-
50% ~ 100%
Overshoot
-
Max Load
Settling Time
-
VO=1.0 V
100% ~ 50%
Overshoot
-
Max Load
Settling Time
-
90 mV
30 uS
90 mV
30 uS
80 mV
30 uS
80 mV
30 uS
80 mV
30 uS
80 mV
30 uS
125 mV
60 uS
125 mV
60 uS
120 mV
60 uS
120 mV
60 uS
120 mV
60 uS
120 mV
60 uS
Test conditions:
di/dt = 0.5 A/uS; Vin =
2.5 V; with a 220 uF
tantalum capacitor at the
output.
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com