XRAH-10J_07 Datasheet, PDF (1/7 Pages) Bel Fuse Inc. – NON-ISOLATED DC/DC CONVERTERS

NON-ISOLATED DC/DC CONVERTERS
2.5 Vdc Input
0.9 Vdc - 1.65 Vdc/10 A Output
xRAH-10J Series RoHS Compliant Rev.A
• Non-Isolated
• Low Profile Package (7.82 mm)
• Fixed Frequency (300 kHz)
• Under-Voltage Lockout (UVLO)
• UL60950-1 Recognized (UL/cUL)
• Remote On/Off
• Short Circuit Protection
• Over Current Protection
• Trim Function
Description
The Bel xRAH-10Jxx0 is part of the low cost non-isolated dc/dc power converter series. The modules use a SMD
or SIP package for ease of layout and space savings. The output is closely regulated and the efficiency of 1.5
Vdc output is typically 88% at full load. Typical features include remote on/off, input under voltage lockout, over
current protection and short circuit protection.
Part Selection
Output
Input
Voltage
Voltage
1.5 V
2.5 V
Max. Output
Current
10 A
Max. Output
Power
15 W
Typical
Efficiency
88%
Part Number
Surface Mount
SRAH-10J150
Part Number
Vertical Mount
VRAH-10J150
1.2 V
1.0 V
2.5 V
2.5 V
10 A
10 A
12 W
10 W
83%
80%
SRAH-10J120
SRAH-10J100
VRAH-10J120
VRAH-10J100
Notes: 1. Add “0” suffix at the end of the model number to indicate “Tube Packaging”, and “R” for “Reel
Packaging”, and “G” for “Tray Packaging”.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Input Voltage (continuous)
-0.3 V
-
6V
Output Enable Terminal Voltage
-0.3 V
-
7V
Ambient Temperature
-40 °C
-
85 °C
Storage Temperature
-40 °C
-
125 °C
Notes
Input Specifications
Parameter
Input Voltage
Input Current (no load)
Input Current (full load)
Vo=1.5 V
Vo=1.2 V
Vo=1.0 V
Remote Off Input Current
Input Reflected Ripple Current
(pk-pk)
Input Reflected Ripple Current
(rms)
I²t Inrush Current Transient
Turn on Voltage Threshold
Turn off Voltage Threshold
Min
2.25 V
-
-
-
-
-
-
-
-
2V
1.8 V
Typ
2.5 V
75 mA
6.8 A
5.6 A
4.9 A
4 mA
80 mA
25 mA
0.04 A²s
2.1 V
2V
Max
2.75 V
-
Notes
-
-
-
8 mA
150 mA
50 mA
0.10 A²s
2.15 V
2.15 V
Tested with simulated source
impedance of 500 nH, 5 Hz to 20 MHz;
with a 270 uF/16 V with ESR=0.018
ohm max, at 100 kHz at 25 °C
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel [phone] • Fax [phone] • www.belfuse.com