AT1040 Datasheet, PDF (1/7 Pages) BCD Semiconductor Manufacturing Limited – General Purpose ITVS, 4 I/Os, CI/O-VSS<1.1pF, VCC

Preliminary Datasheet
General Purpose ITVS, 4 I/Os, C_I/O-VSS<1.1pF, V_CC
AT1040
General Description
BCD ITVS (Integrated Transient Voltage Suppression)
devices are designed and built using a BCD
proprietary process based on BCD standard
technology. These devices integrate the various diodes,
transistors and resistors required to build these ITVS
products. These diodes and transistors feature low
parasitic resistance and the diodes also exhibit low
capacitance. Using these devices, BCD is able to
design voltage clamping products where low
capacitance associated with low dynamic resistance is
required.
The BCD AT1040 is a general purpose, high
performance and low cost device suitable for
protecting high speed data interfaces. The AT1040 is a
unique design integrating low capacitance steering
diodes and a clamping cell, specially created to protect
sensitive components connected to data and
transmission lines.
The AT1040 is available in SOT-23-6 package. This
package allows simple and optimal placement in
existing high-speed PCB layout.
Features
• Low Clamping Voltage:
Typical 6.5V at 10A 100ns, TLP, VCC to VSS
Typical 9V at 10A 100ns, TLP, I/O to VSS
9.5V at 12A 8μs/20μs, VCC to VSS
9.6V at 6A 8μs/20μs, I/O to VSS
• IEC 61000-4-2:
±30kV (VCC to VSS, Air)
±30kV (VCC to VSS, Contact)
• IEC 61000-4-2:
+28kV, -20kV (I/O to VSS, Air)
+25kV, -16kV (I/O to VSS, Contact)
• IEC 61000-4-5: ±12A (VCC to VSS)
• IEC 61000-4-5: ±6A (I/O to VSS)
• Input Capacitance from VCC to VSS: 0.65pF
• TLP Dynamic Resistance, VCC to VSS: 0.15Ω
• Monolithic Silicon Technology
Application
• USB 2.0 Power/Data Lines Protection
• HDMI 1.3, High Definition Multi Media
• IEEE 1394
• Laptop and Personal Computers
• Flat Panel Displays
• Video Graphics Cards
• SIM Ports
SOT-23-6
Aug. 2012 Rev. 2.0
Figure 1. Package Type of AT1040
BCD Semiconductor Manufacturing Limited
1