AP2132_10 Datasheet, PDF (1/13 Pages) BCD Semiconductor Manufacturing Limited – 2A CMOS LDO Regulator

Data Sheet
2A CMOS LDO Regulator
AP2132
General Description
The AP2132 series are positive voltage regulator ICs
fabricated by CMOS process. The ICs consist of a
voltage reference, an error amplifier, a power
transistor, a resistor network for setting output
voltage, a current limit circuit for current protection,
and a chip enable circuit.
The AP2132 have features of large current, low
dropout voltage, high output voltage accuracy, and
low input voltage. The AP2132 provide a power good
(PG) signal to indicate if the voltage level of V_OUT
reaches 92% of its rating value. And it operates with
a V_IN as low as 1.4V and V_PP voltage 5V with output
voltage programmable as low as 0.6V.
The AP2132 are available in 1.2V, 1.5V, 1.8V, 2.5V
fixed output voltage versions and adjustable output
voltage version. The fixed versions integrate the
adjust resistors. It is also available in an adjustable
version, which can set the output voltage with
external resistor. If the pin of adjustable output
voltage is to ground, it will switch to fixed output
voltage.
The AP2132 series are available in PSOP-8 package.
Features
• Adjustable Output: 0.6V to 3.0V
• Low Dropout Voltage: 300mV@I_OUT=2A,
V_OUT=1.2V
• Over Current and Over Temperature Protection
• Enable Pin
• PSOP-8 Package with Thermal Pad
• Maximum Output Current: 2A
• High Output Voltage Accuracy: 2%
• V_OUT Power Good Signal
• Excellent Line/Load Regulation
Applications
• Notebook
Oct. 2010 Rev. 1. 2
PSOP-8
Figure 1. Package Type of AP2132
BCD Semiconductor Manufacturing Limited
1