G141I1-L01 Datasheet, PDF (8/26 Pages) AZ Displays – TFT LCD Tentative Specification

Issued Date: Jun. 18, 2008
Model No.: G141I1 - L01
Tentative
Note (3) The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, f_v = 60
Hz, whereas a power dissipation check pattern below is displayed.
a. White Pattern
b. Black Pattern
Active Area
Active Area
Note (4) The specified power are the sum of LCD panel electronics input power and the inverter input
power. Test conditions are as follows.
(a) Vcc = 3.3 V, Ta = 25 ± 2 ºC, f_v = 60 Hz,
(b) The pattern used is a black and white 32 x 36 checkerboard, slide #100 from the VESA file
“Flat Panel Display Monitor Setup Patterns”, FPDMSU.ppt.
(c) Luminance: 60 nits.
(d) The inverter used is provided from ”Darfon VK16165.101” Please contact them for detail
information. CMO doesn’t provide the inverter in this product.
Note (5) The parameters of LVDS signals are defined as the following figures.
VCM
Single Ended
0V
Differential
V_TH(LVDS)
0V
V_TL(LVDS)
|VID|
|VID|
8 / 26
The information described in this technical specification is tentative and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 0.0