G121S1-L02 Datasheet, PDF (23/29 Pages) AZ Displays – 12.1” TFT-LCD module

Issued Date: Jan. 11, 2010
Model No.: G121S1-L02
Approval
8. RELIABILITY TEST CRITERIA
Test Item
High Temperature Storage Test
Low Temperature Storage Test
Thermal Shock Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
Shock (Non-Operating)
Vibration (Non-Operating)
Test Condition
85ºC, 240 hours
-30ºC, 240 hours
-30ºC, 0.5hourЧ Ш
80ºC, 240 hours
-30ºC, 240 hours
85к, 0.5hour; 1hour/cycle,100cycles
60ºC, 90%RH, 240hours
200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
Note (1) There should be no condensation on the surface of panel during test.
Note
(1)(2)
(3)
(3)
Note (2) Temperature of panel display surface area should be 85 ºC Max.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so
that the module would not be twisted or bent by the fixture.
Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification
is judged before reliability test.
23 / 29
Version 2.0