|
G150XGE-L04_14 Datasheet, PDF (21/28 Pages) AZ Displays – 15.0” TFT Liquid Crystal Display module | |||
|
◁ |
PRODUCT SPECIFICATION
8. RELIABILITY TEST CRITERIA
Test Item
High Temperature Storage Test
Low Temperature Storage Test
Thermal Shock Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
ESD Test (Operation)
Shock (Non-Operating)
Vibration (Non-Operating)
Note (1) No condensation of water.
Test Condition
85â, 240 hours
-40â, 240 hours
-30â, 0.5 hourââ80â, 0.5 hour; 100cycles, 1 hour/cycle
80â, 240 hours
-30â, 240 hours
60â, RH 90%, 240 hours
150pF, 330Ω, 1 sec/cycle
Condition 1 : panel contact, ±8 KV
Condition 2 : panel non-contact ±15 KV
50G, 11ms, half sine wave, 1 time for ± X, ± Y, ± Z direction
1.5G, 10 ~ 300 Hz sine wave, 10 min/cycle, 3 cycles each
X, Y, Z direction
Note
(1), (2)
(2)
(2), (3)
(2), (3)
Note (2) No display malfunction.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Note (4) Temperature of panel display surface area should be 90â Max.
Version 2.0
4 June 2013
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
21 / 27
|
▷ |