G133IGE-L03 Datasheet, PDF (21/27 Pages) AZ Displays – 13.3” TFT Liquid Crystal Display module

PRODUCT SPECIFICATION
8. RELIABILITY TEST
8.1 RELIABILITY TEST CONDITION
No.
Test Item
Test Condition
Note
1 High Temperature Storage
80 , 240 hours
2 Low Temperature Storage
-30 , 240 hours
3 Thermal Shock Storage
4 High Temperature Operating
{(-30 , 0.5 hour) (80 , 0.5 hour)}, 100 cycles
70 , 240 hours
(1) (2)
5 Low Temperature Operating
-30 , 240 hours
6 High Temperature & High Humidity Operating 60 , 90% RH, 240hours
7 Shock (Non-Operating)
200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z. (3)
8 Vibration (Non-Operating)
1.5G,10~300Hz,10min/cycle,3 cycles each X,Y,Z (3)
Note (1) There should be no condensation on the surface of panel during test.
Note (2) The temperature of panel display surface area should be 80 Max.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification
is judged before the reliability test.
Version 1.0
6 April 2011
21 / 27
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.