G133IGE-L03 Datasheet, PDF (20/27 Pages) AZ Displays – 13.3” TFT Liquid Crystal Display module

PRODUCT SPECIFICATION
Note (4) Definition of Luminance of White (L_C):
Measure the luminance of gray level 63 at center point
L_C = L (5)
L (x) is corresponding to the luminance of the point X at Figure in Note (5).
Note (5) Definition of White Variation (δW):
Measure the luminance of gray level 63 at 5 points
δW = Maximum [L (1), L (2), L (3), L (4), L (5)] / Minimum [L (1), L (2), L (3), L (4), L (5)]
Horizontal Line
D
D/4
D/2
3D/4
W/4
W ^W/2
3W/4
1
2
5
3
4
X : Test Point
X=1 to 5
Active Area
Note (6) Measurement Setup:
The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module
LCD Panel
USB2000
CS-2000T
Center of the Screen
500 mm
Light Shield Room
(Ambient Luminance < 2 lux)
Version 1.0
6 April 2011
20 / 27
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.