G154I1-LE1 Datasheet, PDF (20/26 Pages) AZ Displays – 15.4” TFT-LCD module

PRODUCT SPECIFICATION
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 63 at 5 points
Maximum [L (1), L (2), L (3), L (4), L (5)]
δW =
Minimum [L (1), L (2), L (3), L (4), L (5)]
Horizontal Line
D
D/4
D/2
3D/4
W/4
W ^W/2
3W/
1
2
5
3
4
Active Area
X : Test Point
X=1 to 5
8. Reliability Test Criteria
Test Item
High Temperature Storage Test
Low Temperature Storage Test
Thermal Shock Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
Shock (Non-Operating)
Vibration (Non-Operating)
Test Condition
80ºC, 240 hours
-30ºC, 240 hours
-30ºC, 0.5hour←→80
80ºC, 240 hours
-30ºC, 240 hours
, 0.5hour; 1hour/cycle,100cycles
60ºC, 90%RH, 240hours
50G, 11ms, half sine wave, 1 time for ± X, ± Y, ± Z.
1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
Note
(1)(2)(4)
(3)(4)
(3)(4)
Note (1) There should be no condensation on the surface of panel during test.
Note (2) Temperature of panel display surface area should be 80 ºC Max.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
Note (4) In the standard conditions, there is no function failure issue occurred. All the cosmetic specification
is judged before reliability test.
Version 2.0
18th, Mar., 2011
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
20 / 26