709176001501006 Datasheet, PDF (4/5 Pages) AVX Corporation – Single IDC Contact 18-24 AWG: WTB

Single IDC Contact 18-24 AWG: WTB
9176-500
INTER_CONNECT
ASSEMBLY TOOLING – CAP USED
CAP APPLICATION TOOL
06-9176-7018-01-000
NOTES:
1. ASSEMBLY TOOLING FOR CAP.
2. AREA OF PCB TO BE KEPT CLEAR OF COMPONENTS,
TACKS PERMISSIBLE.
3. WIRE AND CAP INSERTED IN ONE OPERATION.
4. REFER TO APPLICATION NOTE 201-01-124 FOR FURTHER
INFORMATION.
5. REFER BELOW WHEN CONTACT USED WITHOUT CAP.
UNIVERSAL HANDLE
06 7000 7730 01 000
ORIENTATE CAP
IN TOOL
ASSEMBLY TOOLING – CAP NOT USED
WIRE ONTO CONTACT
2.1 WIRE (18-20 AWG)
06-9176-7019-01-000
06-9176-7020-01-000
1.6 WIRE (22-24 AWG)
06-9176-7019-02-000
06-9176-7020-02-000
UNIVERSAL HANDLE
06 7000 7730 01 000
NOTES:
1. ASSEMBLY TOOLING FOR CONTACT ONLY, NO CAP USED.
2. MINIMUM AREA OF PCB TO BE KEPT CLEAR OF
COMPONENTS, TRACK PERMISSIBLE.
3. REFER TO TABLE FOR CORRECT TOOL/WIRE COMBINATION.
4. REFER TO APPLICATION NOTE 201-01-124 FOR FURTHER
INFORMATION.
Wire Guage
22-24 AWG
18-20 AWG
Wire
Insulation ø
1.10 to 1.60
1.60 to 2.10
Metal Tool
Plastic Tool
High Volume
Small to Medium Volume
06-9176-7019-02-000 06-9176-7020-02-000
06-9176-7019-01-000 06-9176-7020-01-000
Handle
06-7000-7730-01-000
06-7000-7730-01-000
4