English
Language : 

709176001501006 Datasheet, PDF (1/5 Pages) AVX Corporation – Single IDC Contact 18-24 AWG: WTB
Single IDC Contact 18-24 AWG: WTB
9176-500
INTERCONNECT
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet
the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive
levels of shock, vibration, and temperature cycling to prove their reliability and robustness. This new
single contact was developed as a standalone component to enhance the application uses with the IDC
technology. The simplicity of inserting a wire into an SMT contact with a small tool or optional retention
/ termination cap allows a wide range of devices to be connected to the PCB without soldering. In SSL
applications specifically, these contacts are used to bring power and signal onto the PCB or are used to
daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight
connection to conductor of the wire, the optional cap provides a positive strain relief even in the harshest
conditions. In case of repair, the wires can be removed and replace up to three times.
The single 9176 series contact and cap accepts 18 AWG to 24 AWG wires with an insulation diameter
ranging from 1.1mm to 2.1mm. These dual beam contacts support a 10 amp current rating with a large
SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts
as the termination tool for severe vibration applications.
APPLICATIONS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• Application notes: refer to 201-01-124
FEATURES AND BENEFITS
• IDC contact is supplied in T&R pockets for standard SMT placement
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Optional termination cap provides additional strain relief for severe environments
• Tested to automotive levels on shock, vibration and temperature cycling for reliability
• Reduced total applied cost versus solder or crimp processes
• Individual contacts can be located anywhere on the PCB based on specific application
ELECTRICAL
• Current Rating: 10 Amps/Contact
• Voltage Rating: Dependant on
component proximity
ENVIRONMENTAL
• Operating Temperature:
-40ºC to +125ºC
HOW TO ORDER – CONTACT OPTIONS
70
9176
001
5XX
MECHANICAL
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
006
Prefix
70 = Contact
Series
Number of Ways
Code
No of
Ways
Details
001 1 Page 3
Wire Gauge Size
Code
Accepted
Wire Gauge
501
18 Gauge Stranded
511 20 Gauge Solid or Stranded
522 22 Gauge Solid or Stranded
532 24 Gauge Solid or Stranded
HOW TO ORDER – CAP OPTIONS
60 9176
001
5XX
Plating
Option
006 = Pure Tin
all over
X00
Prefix
60 = Cap
Series
Number of Ways
Code
No of
Ways
Details
001 1 Page 5
Wire Gauge Size
Code
516
521
Wire Insulation
(AWG)
1.1-1.6 (22-24)
1.6-2.1 (18-20)
Insulator Color
Code Color Application
000 Black Industrial
100 White Lighting
CONNECTOR/TOOLING PART NUMBER MATRIX
SERIES 9176-500 IDC
HAND INSERTION TOOLING*
ACCESSORY CAPS
AWG
Wire
Insulation
Positions
Part Number
Plastic
(medium volume)
Metal
(high volume)
Cap Application
Tool
White
Black
18 Ø 1.6 - 2.1 1p 709176001501006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000
20 Ø 1.6 - 2.1 1p 709176001511006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000
22 Ø 1.1 - 1.6 1p 709176001522006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000
24 Ø 1.1 - 1.6 1p 709176001532006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000
* Hand Insertion Tooling and Cap Application - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124
Certification: UL File #E90723
1