CCR05CX1R0 Datasheet, PDF (13/71 Pages) AVX Corporation – Multiayer Ceramic Leaded Capacitors

Z5U Dielectric “E”
GENERAL SPECIFICATIONS
Capacitance Range
See Individual Parts Specifications
Capacitance Test at 25°C
Measured at 0.5 VRMS max. at 1 KHz
Capacitance Tolerances
M = ±20%, Z = +80%, -20%, P = GMV*
Operating Temperature Range
+10°C to +85°C
Temperature Characteristic
+22%, -56%
Voltage Ratings
100 & 50 Vdc
Dissipation Factor
4.0% max. at 1 KHz, .5 VRMS max.
Insulation Resistance 25°C (MIL-STD-202-Method 302)
10 K megohms or 100 megohms - µF minimum,
whichever is less
Dielectric Strength
200% of rated Vdc
Life Test (1,000 hours)
150% rated voltage at +85°C
Moisture Resistance (MIL-STD-202-Method 106)
Immersion Cycling (MIL-STD-202-Method 104, condition B)
For current reliability information, consult factory.
*Guaranteed Minimum Value
12
TYPICAL CHARACTERISTICS
Temperature Coefficient
+30
+20
0
-20
-40
-60
-60 -40 -20
0 +20 +40 +60 +80 +100 +120 +140
Temperature °C
∆ Capacitance vs. Frequency
0
-10
-20
-30
-40
1 kHz
10 kHz
100 kHz 1 MHz
Frequency
10 MHz 100 MHz
Insulation Resistance vs. Temp.
100k
10k
1000
100
10
-60 -40 -20
0 +20 +40 +60 +80 +100 +120 +140
Temperature °C
+20
0
-20
-40
-60
-80
0
Voltage Coefficient
Voltage coefficient for
individual capacitors
within this envelope must
be calculated based
upon WVDC / MIL.
25
50
75
100
125
Volts D.C. Applied