CCR05CX1R0 Datasheet, PDF (11/71 Pages) AVX Corporation – Multiayer Ceramic Leaded Capacitors

C0G (NP0) Dielectric “A”
GENERAL SPECIFICATIONS
Capacitance Range
See Individual Parts Specifications
Capacitance Test at 25°C
Measured at 1 VRMS max. at 1 KHz (1 MHz for 1,000 pF or less)
Capacitance Tolerances
C = ±.25 pF, D = ±.50 pF, E = ±0.5%, F = ±1.0%, G = ±2%,
H = ±3%, J = ±5%, K = ±10%, M = ±20%
For values less than 10 pF tightest tolerance available is ±.25 pF
Operating Temperature Range
-55°C to +125°C
Temperature Characteristic
0 ± 30 ppm/°C
Voltage Ratings
200,100 & 50 Vdc
Dissipation Factor
.15% max. (+25°C and +125°C) for values greater than 30 pF
or Q = 20 x C + 400 for values of 30 pF and below.
1.0 VRMS, 1 MHz for values Ϲ 1,000 pF, and
1 KHz for values > 1,000 pF
Insulation Resistance 25°C (MIL-STD-202-Method 302)
100 K megohms or 1000 megohms - µF minimum,
whichever is less
Dielectric Strength
250% of rated Vdc
Life Test (1,000 hours)
200% rated voltage at +125°C
Moisture Resistance (MIL-STD-202-Method 106)
Thermal Shock (MIL-STD-202-Method 107, condition A,
at rated elevated temperature)
-55°C to +125°C
Immersion Cycling (MIL-STD-202-Method 104, condition B)
For current reliability information, consult factory.
10
TYPICAL CHARACTERISTICS
Temperature Coefficient
+0.5
0
-0.5
Typical Capacitance Change
Envelope: 0±30 ppm/°C
-55 -35 -15 +5 +25 +45 +65 +85 +105 +125
Temperature °C
Aging Rate
+0.2
+0.1
0
-0.1
-0.2
1
10
100
1,000
Hours
Voltage Coefficient
10,000
+0.2
+0.1
0
-0.1
-0.2
25 50 75 100 125 150 175 200
D. C. Volts Applied
Insulation Resistance vs. Temp.
10,000
1,000
100
0
+20
+25 +40 +60 +80 +100 +150
Temperature °C