HFBR-0507Z Datasheet, PDF (9/12 Pages) AVAGO TECHNOLOGIES LIMITED – 125 Megabaud Versatile Link The Versatile Fiber Optic Connection

125 Megabaud Versatile Link Receiver
HFBR-25X6Z Series
Description
The HFBR-25X6Z receivers contain a PIN photodiode and
transimpedance pre-amplifier circuit in a horizontal (HF-
BR-2526Z) or vertical (HFBR-2536Z) blue housing, and
are designed to interface to 1mm diameter plastic opti-
cal fiber or 200 μm hard clad silica glass optical fiber. The
receivers convert a received optical signal to an analog
output voltage. Follow-on circuitry can optimize link per-
formance for a variety of distance and data rate require-
ments. Electrical bandwidth greater than 65 MHz allows
design of high speed data links with plastic or hard clad
silica optical fiber. Refer to Application Note 1066 for de-
tails for recommended interface circuits.
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Soldering Temperature
Cycle Time
Signal Pin Voltage
Supply Voltage
Output Current
Symbol
Min.
T_S
- 40
T
0
A
V
-0.5
O
V
-0.5
CC
I
O
GROUND
4 ^VCC
3 ^GROUND
GROUND
2 ^GROUND
1 ^SIGNAL
SEE NOTES 2, 4, 9
Max.
Unit
+75
°C
+70
°C
260
°C
10
s
V
V
CC
6.0
V
25
mA
Reference
Note 1, 11
CAUTION: The small junction sizes inherent to the design of this component increase the component’s susceptibility to damage from
electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
9