HCPL-0630-000E Datasheet, PDF (9/21 Pages) AVAGO TECHNOLOGIES LIMITED – High CMR, High Speed TTL Compatible Optocouplers

IEC/EN/DIN EN 60747-5-5 Insulation Characteristics*
(HCPL-26xx; 46xx; 6N13x Option 060 Only)
Description
Symbol
Characteristic
Unit
Installation classification per DIN VDE 0110, Table 1
  for rated mains voltage ≤ 300 V_rms I-IV
  for rated mains voltage ≤ 450 V_rms I-IV
Climatic Classification
40/85/21
Pollution Degree (DIN VDE 0110/39)
2
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b*
V_IORM
630
V _peak
 V_IORM x 1.875 = V_PR, 100% Production Test with t_m = 1 sec,
  Partial Discharge < 5 pC
V_PR
1181
V _peak
Input to Output Test Voltage, Method a*
 V_IORM x 1.6 = V_PR, Type and sample test, t_m = 10 sec,
  Partial Discharge < 5 pC
V_PR
1008
V _peak
Highest Allowable Overvoltage
(Transient Overvoltage, t_ini = 60 sec)
V_IOTM
Safety Limiting Values (Maximum values allowed in the event of a failure)  
6000
V _peak
  Case Temperature
  Input Current
  Output Power
Insulation Resistance at T_S, V_IO = 500 V
T_S
I_S,INPUT
P_S,OUTPUT
R_S
175
230
600
≥10⁹
°C
mA
mW
Ω
*Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section, IEC/EN/DIN EN 60747-5-5, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.
IEC/EN/DIN EN 60747-5-5 Insulation Characteristics*
(HCNW137/2601/2611 Only)
Description
Symbol
Characteristic
Unit
Installation classification per DIN VDE 0110, Table 1
  for rated mains voltage ≤ 600 V_rms I-IV
  for rated mains voltage ≤ 1000 V_rms I-III
Climatic Classification
40/85/21
Pollution Degree (DIN VDE 0110/39)
2
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b*
V_IORM
1414
V _peak
 V_IORM x 1.875 = V_PR, 100% Production Test with t_m = 1 sec,
  Partial Discharge < 5 pC
V_PR
2651
V _peak
Input to Output Test Voltage, Method a*
 V_IORM x 1.6 = V_PR, Type and sample test, t_m = 10 sec,
  Partial Discharge < 5 pC
V_PR
2262
V _peak
Highest Allowable Overvoltage
(Transient Overvoltage, t_ini = 60 sec)
V_IOTM
8000
V _peak
Safety Limiting Values (Maximum values allowed in the event of a failure)
  Case Temperature
  Input Current
  Output Power
T_S
150
°C
I_S,INPUT
400
mA
P_S,OUTPUT
700
mW
Insulation Resistance at T_S, V_IO = 500 V
R_S
≥10⁹
Ω
*Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section, IEC/EN/DIN EN 60747-5-5, for a
detailed description.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.
9