HCPL-7601 Datasheet, PDF (7/13 Pages) AVAGO TECHNOLOGIES LIMITED – Isolated line receiver

IEC/EN/DIN EN 60747-5-2 Insulation Characteristics
Description
Symbol Characteristics Unit
Installation classification per DIN VDE 0109*/12.83, Table 1
for rated mains voltage ≤300 V_RMS
for rated mains voltage ≤600 V_RMS
Climatic Classification
I-IV
I-III
40/85/21
Pollution Degree (DIN VDE 0109/12.83)*
2
Maximum Working Insulation Voltage V_IORM
600
V_RMS
848
V_peak
Input to Output Test Voltage, Method b** V_PR = 1.6 X V_IORM
Production test with t_P = 1 sec,
Partial discharge < 5 pC
V_PR
960
V_RMS
1357
V_peak
Input to Output Test Voltage, Method a** V_PR = 1.2 X V_IORM
Production test with t_P = 60 sec,
Partial discharge < 5 pC
V_PR
720
V_RMS
1018
V_peak
Highest Allowable Overvoltage**
(Transient Overvoltage, t_TR = 10 sec)
V_TR
6000
V_peak
Safety-limiting values (Maximum values allowed in the event
of a failure, also see Figure 16)
Case Temperature
Input Power
Output Power
Insulation Resistance at T_SI, V_IO = 500 V R_IS
T_SI
175
°C
P_SI,Input
80
mW
P_SI,Output
250
mW
≥10¹¹
Ω
* This part may also be used in Pollution Degree 3 environments where the rated mains voltage is ≤ 300 V_RMS (per DIN VDE 0190/12.83).
** Refer to the front of the optocoupler section of the current Optoelectronics Designers Catalog for a more detailed description of IEC/EN/DIN EN
60747-5-2 and other product safety regulations.
Insulation Related Specifications
Parameter
Minimum External Clearance
(External Air Gap)
Minimum External Creepage
(External Tracking)
Minimum Internal Clearance
(Internal Plastic Gap)
Comparative Tracking Index
Isolation Group (per DIN VDE 0109)
Symbol
L (IO1)
L (IO2)
CTI
Value
7.0
8.0
0.5
175
IIIa
Units
mm
mm
mm
V
Conditions
Measured from input terminals
to output terminals
Measured from input terminals
to output terminals
Through insulation distance
from conductor to conductor
DIN IEC 112/VDE 303 P1
Material Group
7