ASSR-4110 Datasheet, PDF (7/16 Pages) AVAGO TECHNOLOGIES LIMITED – General Purpose, Form A, Solid State Relay (Photo MOSFET)

Lead Free IR Profile
tp
T_p
T_L
T_smax
T_smin
260 +0/-5°C
217°C
RAMP-UP
3°C/SEC. MAX.
150 - 200°C
t_s
t_L
PREHEAT
60 to 180 SEC.
TIME WITHIN 5°C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
RAMP-DOWN
6°C/SEC. MAX.
60 to 150 SEC.
25
t 25°C to PEAK
TIME (SECONDS)
NOTES:
THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200°C, Tsmin = 150°C
Non-halide flux should be used.
Regulatory Information
The ASSR-4110, ASSR-4111, ASSR-4120 and ASSR-4130 (Preliminary Product Release) are approved by the following
organizations:
UL
Approvals under UL 1577, component recognition program up to V_ISO = 3750 V_RMS
Approvals under CSA Component Acceptance Notice #5.
Insulation and Safety Related Specifications
Parameter
Minimum External Air
Gap (Clearance)
Minimum External Track-
ing (Creepage)
Symbol
L(101)
L(102)
ASSR-
4110
4.9
ASSR-4111
ASSR-4120
7.1
ASSR-
4130 Units
4.9 mm
4.9
7.4
4.8 mm
Minimum Internal Plastic
Gap (Internal Clearance)
0.08
0.08
0.08 mm
Tracking Resistance
CTI
(Comparative Tracking
Index)
Isolation Group
(DIN VDE0109)
175
175
175 V
IIIa
IIIa
IIIa
Conditions
Measured from input terminals to output
terminals, shortest distance through air.
Measured from input terminals to output
terminals, shortest distance path along
body.
Through insulation distance conductor to
conductor, usually the straight line distance
thickness between the emitter and detec-
tor.
DIN IEC 112/VDE 0303 Part 1
Material Group (DIN VDE 0109)