HCPL-5731 Datasheet, PDF (5/12 Pages) AVAGO TECHNOLOGIES LIMITED – Hermetically Sealed, Low IF, Wide VCC, High Gain Optocouplers

Hermetic Optocoupler Options
Option Description
100
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on com-
mercial and hi-rel product in 8 and 16 pin DIP (see drawings below for details).
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
4.32 (0.170)
MAX.
1.14 (0.045)
1.40 (0.055)
0.51 (0.020)
MAX.
4.32 (0.170)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
1.14 (0.045)
1.40 (0.055)
0.51 (0.020)
MAX.
Note: Dimensions in Millimeters (Inches).
0.20 (0.008)
0.33 (0.013)
7.36 (0.290)
7.87 (0.310)
200
Lead finish is solder dipped rather than gold plated. This option is available on commercial and hi-rel product in 8 and
16 pin DIP. DLA Drawing part numbers contain provisions for lead finish. All leadless chip carrier devices are delivered
with solder dipped terminals as a standard feature.
300
Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This option is available on
commercial and hi-rel product in 8 and 16 pin DIP (see drawings below for details). This option has solder dipped
leads.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
4.57 (0.180)
MAX.
1.40 (0.055)
1.65 (0.065)
0.51 (0.020)
MAX.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
4.57 (0.180)
MAX.
1.40 (0.055)
1.65 (0.065)
0.51 (0.020)
MAX.
5° MAX.
0.20 (0.008)
0.33 (0.013)
9.65 (0.380)
9.91 (0.390)
4.57 (0.180)
MAX.
1.07 (0.042)
1.32 (0.052)
Note: Dimensions in Millimeters (Inches).
600
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This option is available on com-
mercial and hi-rel product in 8 and 16 pin DIP (see drawings below for details). Contact factory for the availability of this
option on DLA part types.
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
3.81 (0.150)
MMAINX.
1.14 (0.045)
1.25 (0.049)
Note: Dimensions in Millimeters (Inches).
Solder contains lead.
0.20 (0.008)
0.33 (0.013)
7.36 (0.290)
7.87 (0.310)
0.51 (0.020)
MIN.
2.29 (0.090)
2.79 (0.110)
3.81 (0.150)
MAX.
1.02 (0.040)
TYP.
5