AFCT-57D5ANPZ Datasheet, PDF (5/18 Pages) AVAGO TECHNOLOGIES LIMITED – Fibre Channel RoHS Compliant Optical Transceiver

Electromagnetic Interference (EMI)
Equipment incorporating gigabit transceivers is typically
subject to regulation by the FCC in the United States,
CENELEC EN55022 (CISPR 22) in Europe and VCCI in Japan.
The AFCT-57D5ANPZ’s compliance to these standards is
detailed in Table 1. The metal housing and shielded design
of the AFCT-57D5ANPZ minimizes the EMI challenge facing
the equipment designer.
EMI Immunity (Susceptibility)
Due to its shielded design, the EMI immunity of the AFCT-
57D5ANPZ exceeds typical industry standards.
Flammability
The AFCT-57D5ANPZ optical transceiver is made of metal
and high strength, heat resistant, chemical resistant and
UL 94V-0 flame retardant plastic.
Table 1. Regulatory Compliance
Feature
Test Method
Electrostatic Discharge (ESD)
to the Electrical Pins
MIL-STD-883C
Method 3015.4
Electrostatic Discharge (ESD)
Variation of IEC 61000-4-2
to the Duplex LC Receptacle

GR1089

Electrostatic Discharge (ESD)
Variation of IEC 801-2
to the Optical Connector
Electromagnetic Interference
(EMI)
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A) 
VCCI Class 1
Immunity
Variation of IEC 61000-4-3

Laser Eye Safety and
US FDA CDRH AEL Class 1
Equipment Type Testing
US21 CFR, Subchapter J per
Paragraphs 1002.10
BAUA  RT and 1002.12 
 
GEPRU¬FT
TU¬V
Rheinland
Product Safety
TYPE
APPROVED
(IEC) EN60825-1: 1994 + A11 + A2 
(IEC) EN60825-2: 1994 + A1 
(IEC) EN60950: 1992 + A1 + A2 + 
  A3 + A4 + A11
Component Recognition
Underwriters Laboratories and
Canadian Standards Association 
Joint Component Recognition 
for Information Technology 
Equipment including Electrical 
Business Equipment
RoHS Compliance


Performance
Class 1(> 2000 Volts) 
Typically, no damage occurs with 25 kV when 
the duplex LC connector receptacle is 
contacted by a Human Body Model probe.
10 contacts of 8 kV on the electrical faceplate 
with device inserted into a panel.
Air discharge of 15 kV (min.) contact to 
connector without damage.
System margins are dependent on customer 
board and chassis design. 
Typically shows no measurable effect from a  
10 V/m field swept from 10 MHz to 1 GHz.
CDRH certification TBD 
TUV file TBD 
 
UL file TBD 
Less than 1000 ppm of cadmium, lead, mercury, 
hexavalent chromium, polybrominated biphenyls,
and polybrominated biphenyl ethers.
5