AFCT-57D5ANPZ Datasheet, PDF (1/18 Pages) AVAGO TECHNOLOGIES LIMITED – Fibre Channel RoHS Compliant Optical Transceiver

AFCT-57D5ANPZ
Digital Diagnostic SFP (Small Form Pluggable), Low Voltage (3.3 V)
25km, 1310nm DFB, 8.5/4.25/2.125 GBd Fibre Channel
RoHS Compliant Digital Diagnostic Optical Transceiver
Data Sheet
A₁F₃₂C_11C0CSH^TnRNI^-mNF⁵_{: A(A}⁷LJ3^DA0) _04CS⁵_44LE4^A_5AR5^NSCPSD^PR11ZOCD
Description
Avago Technologies’ AFCT-57D5ANPZ optical transceiver
supports high-speed serial links over singlemode optical
fiber at signaling rates up to 8.5 GBd. Compliant with
Small Form Pluggable (SFP) Multi Source Agreement (MSA)
mechanical and electrical specifications for LC Duplex
transceivers, ANSI Fibre Channel for FC-PI-4 and FC-PI-2 for
gigabit applications. The part is electrically interoperable
with SFP conformant devices.
The AFCT-57D5ANPZ is a multi-rate 1310nm DFB SFP
which ensures compliance to 8.5/4.25/2.125 GBd Fibre
Channel specifications without the need for Rate Select.
The AFCT-57D5ANPZ will ignore both Rate Select pin
and control bit inputs (ie. no connect inside the SFP). This
simplifies Fibre Channel host auto-negotiation algorithms,
layout and software.
Related Products
• AFBR-57D5APZ: 850 nm + 3.3 V LC SFP
for 8.5/4.25/2.125 GBd Fibre Channel
• AFCT-57D5APZ:1310nm FP +3.3V LC SFP
for 8.5/4.25/2.125 GBd Fiber Channel
• AFCT-57R5APZ: 1310nm FP +3.3V LC SFP
for 4.25/2.125/1.0625 GBd Fiber Channel
• AFCT-57R5ATPZ: 1310nm DFB +3.3V LC SFP
for 4.25/2.125/1.0625 GBd Fiber Channel
• AFCT-57D5ATPZ: 1310nm DFB +3.3V LC SFP
for 8.5/4.25/2.125 GBd Fibre Channel
Features
•  Compliant to Restriction on Hazardous Substances
(RoHS) directive
• Diagnostic features per SFF-8472 “Diagnostic
Monitoring Interface for Optical Transceivers”
• Real time monitoring of:
– Transmitted optical power
– Received optical power
– Laser bias current
– Temperature
– Supply voltage
•  Rate Select not required
•  Wide temperature and supply voltage operation
(-10°C to 85°C) (3.3 V ± 10%)
• SFP Plus mechanical Applications
• Transceiver specifications per SFP (SFF-8074i) Multi-
Source Agreement and SFF-8472 (revision 10.0)
- 8.5 GBd Fibre Channel operation for up to 25km
link distance.
- 4.25 GBd Fibre Channel operation for up to 30km
link distance.
- 2.125 GBd Fibre Channel operation for up to 30km
link distance.
• Extended link lengths at 8.5/4.25/2.125 GBd with single
mode fiber
• LC Duplex optical connector interface conforming to
ANSI TIA/EIA604-10 (FOCIS 10A)
• 1310nm Distributed Feedback Laser (DFB) source tech-
nology
• IEC 60825-1 Class 1/CDRH Class 1 laser eye safe
• Enhanced EMI performance for high port density ap-
plications
1