HCPL-M453-000E Datasheet, PDF (4/9 Pages) AVAGO TECHNOLOGIES LIMITED – Small Outline, 5 Lead, High Speed Optocouplers

Regulatory Information
The HCPL-M452/M453 are approved by the following organizations:
UL
Approved under UL 1577, component recognition
program up to V_ISO = 3750 V_RMS expected prior to product
release.
CSA
Approved under CSA Component Acceptance Notice #5.
Insulation Related Specifications
Parameter
Min External Air Gap (Clearance)
Min. External Tracking Path (Creepage)
Min. Internal Plastic Gap (Clearance)
Tracking Resistance
Isolation Group (per DIN VDE 0109)
Symbol
L(IO1)
L(IO2)
CTI
Value
≥5
≥5
0.08
175
IIIa
Units
mm
mm
mm
V
Conditions
Measured from input terminals to output
terminals
Measured from input terminals to output
terminals
Through insulation distance conductor to
conductor
DIN IEC 112/VDE 0303 Part 1
Material Group DIN VDE 0109
Absolute Maximum Ratings
(No Derating Required up to 85°C)
Storage Temperature .............................................................................-55°C to +125°C
Operating Temperature ........................................................................-55°C to +100°C
Average Input Current - I_F ................................................................................ 25 mA^[1]
Peak Input Current - I_F ........................................................................................ 50 mA^[2]
(50% duty cycle, 1 ms pulse width)
Peak Transient Input Current - I_F ............................................................................ 1.0 A
(1 μs pulse width, 300 pps)
Reverse Input Voltage - V_R (Pin3-1) ............................................................................ 5 V
Input Power Dissipation.....................................................................................45 mW^[3]
Average Output Current - I_O (Pin 5) .......................................................................8 mA
Peak Output Current ................................................................................................ 16 mA
Output Voltage - V_O (Pin 5-4) ................................................................... -0.5 V to 20 V
Supply Voltage - V_CC (Pin 6-4) .................................................................. -0.5 V to 30 V
Output Power Dissipation.............................................................................. 100 mW^[4]
Infrared and Vapor Phase Reflow Temperature.......................................see below
4