HCPL-4100 Datasheet, PDF (4/12 Pages) Agilent(Hewlett-Packard) – Optically Coupled 20 mA Optically Coupled 20 mA

Recommended Pb-Free IR Profile
t_p
T_p
T_L ^{217 °C}
260 +0/-5 °C
RAMP-UP
3 °C/SEC. MAX.
T_smax ^{150 - 200 °C}
T_smin
t_s
PREHEAT
t_L
60 to 180 SEC.
TIME WITHIN 5 °C of ACTUAL
PEAK TEMPERATURE
20-40 SEC.
RAMP-DOWN
6 °C/SEC. MAX.
60 to 150 SEC.
25
t 25 °C to PEAK
TIME
NOTES:
THE TIME FROM 25 °C to PEAK TEMPERATURE = 8 MINUTES MAX.
T_smax = 200 °C, T_smin = 150 °C
Note: Non-halide flux should be used.
Figure 2. Pb-Free IR Profile.
Regulatory Information
The HCPL-4100 has been approved
by the following organizations:
UL
Recognized under UL 1577, Com-
ponent Recognition Program, File
E55361.
CSA
Approved under CSA Component
Acceptance Notice #5, File CA
88324.
Insulation and Safety Related Specifications
Parameter
Symbol Value Units Conditions
Min. External Air Gap
(External Clearance)
L(IO1)
7.1 mm Measured from input terminals to output
terminals, shortest distance through air
Min. External Tracking Path
(External Creepage)
L(IO2)
7.4 mm Measured from input terminals to output
terminals, shortest distance path along body
Min. Internal Plastic Gap
(Internal Clearance)
0.08 mm Through insulation distance, conductor to
conductor, usually the direct distance
between the photoemitter and photodetector
inside the optocoupler cavity
Tracking Resistance
(Comparative Tracking Index)
CTI
200 Volts DIN IEC 112/VDE 0303 PART 1
Isolation Group
IIIa
Material Group (DIN VDE 0110, 1/89, Table 1)
Option 300 – surface mount classification is Class A in accordance with CECC 00802.
4