English
Language : 

ACNV260E Datasheet, PDF (4/10 Pages) AVAGO TECHNOLOGIES LIMITED – 2mm DTI, 10MBd Digital Optocoupler 13mm creepage and clearance
Solder Reflow Profile
Recommended reflow condition as per JEDEC Standard, J-STD-020 (latest revision). Non-Halide Flux should be used.
Insulation and Safety Related Specifications
Parameter
Minimum External Air Gap
(External Clearance)
Minimum External
Tracking (External Creepage)
Minimum Internal Plastic Gap
(Internal Clearance)
Symbol
L(101)
L(102)
ACNV260E
13
13
2.0
Units
mm
mm
mm
Minimum Internal Tracking
(Internal Creepage)
4.6
mm
Tracking Resistance
CTI
200
V
(Comparative Tracking Index)
Maximum Working Insulation VIORM
375
Voltage
Vpeak
Safety-limiting values – maximum values allowed in the event of a failure.
Case Temperature
TS
150
°C
Input Current**
IS, INPUT
400
mA
Output Power**
PS, OUTPUT 1
W
Isolation Group
IIIa
Note:
** Refer to Figure 14 for dependence of PS and IS on ambient temperature.
Conditions
Measured from input terminals to output terminals,
shortest distance through air.
Measured from input terminals to output terminals,
shortest distance path along body.
Through insulation distance conductor to conductor,
usually the straight line distance thickness between
the emitter and detector.
Measured from input terminals to output terminals,
along internal cavity.
DIN IEC 112/VDE 0303 Part 1.
Per IEC 60079-11.
Material Group (DIN VDE 0110, 1/89, Table 1).
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Average Input Current
Reverse Input Voltage
Input Power Dissipation
Supply Voltage (1 Minute Maximum)
Enable Input Voltage (Not to Exceed VCC by more than 500mV)
Enable Input Current
Output Collector Current
Output Collector Voltage
Output Collector Power Dissipation
Lead Solder Temperature
Solder Reflow Temperature Profile
Symbol Min.
Max.
TS
-55
125
TA
-40
105
IF(AVG)
20
VR
3
PI
40
VCC
7
VE
VCC+0.5
IE
5
IO
50
VO
7
PO
85
TLS
245°C for 10 sec,
up to seat plane
See Package Outline Drawings section
Units
°C
°C
mA
V
mW
V
V
mA
mA
V
mW
4