HCPL-8100 Datasheet, PDF (2/10 Pages) Agilent(Hewlett-Packard) – High Current Line Driver

Package Pin Out
1 Status
2 Tx-en
3 Tx-in
4 R _ref
Tx-out 8
VCC 7
GND 6
GND 5
Pin Descriptions
Pin No. Symbol Function
1
Status Line condition
detection
Description
A logic high indicates line conditions such as- under-
voltage when V_CC < 4 V- load detection when I_Tx-out
< -0.25 A- over-temperature (thermal shutdown)
2
Tx-en Transmit enable
A logic high enables the Tx-out;A logic low disables
the Tx-out and changes it to high impedance state
3
Tx-in Transmit input
Transmit signal input
4
R_ref
Resistor reference
Sets line driver biasing current, typically 24 kW
5, 6 GND Power supply ground Power supply and signal ground
7
V_CC
5 V power supply
5 V power supply
8
Tx-out Transmit output
Transmit signal output, to be enabled by Tx-en
Block Diagram
Status ¹
2
Tx-en
Tx-in ³
Rref ⁴
Status
Output
Amp
Under-Volt
Detection
Load
Detection
Over-Temp
Detection
7
VCC
6 _GND
5
GND
8 _Tx-out
Ordering Information
Option
Part number
RoHS Compliant
Packaging
Surface Mount
Tape & Reel
Quantity
HCPL-0810
-000E
SO-8
X
100 per tube
-500E
SO-8
X
X
1500 per reel
HCPL-8100
-000E
300mil DIP-8
50 per tube
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
ACPL-0810-500E to order product of SO-8 package in Tape and Reel packaging and RoHS compliant.
Example 2:
HCPL-8100-000E to order product of 300mil DIP-8 package in Tube packaging and RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and RoHS
compliant option will use ‘-XXXE‘.