AFCT-711XPDZ Datasheet, PDF (15/15 Pages) AVAGO TECHNOLOGIES LIMITED – Multi-rate 1310 nm XFP 10 Gbit/s Optical Transceiver

Eye Safety
The AFCT-711XPDZ transceivers provide Class 1 eye
safety by design. Avago Technologies has tested the
transceiver design for regulatory compliance, under
normal operating conditions and under single fault con-
ditions. See Table 2.
Flammability
The AFCT-711XPDZ is compliant to UL 94V-0.
Customer Manufacturing Processes
The module is pluggable and is not designed for aqueous
wash, IR reflow or wave soldering processes.
Caution
The AFCT-711XPDZ contains no user serviceable parts.
Tampering with or modifying the performance of the
AFCT-711XPDZ will result in voided product warranty.
It may also result in improper operation of the AFCT-
711XPDZ circuitry, and possible overstress of the laser
source. Device degradation or product failure may result.
Connection of the AFCT-711XPDZ to a non-approved
optical source, operating above the recommended
absolute maximum conditions may be considered an
act of modifying or manufacturing a laser product. The
person(s) performing such an act is required by law to
recertify and reidentify the laser product under the provi-
sions of U.S. 21 CFR (Subchapter J) and the TUV.
Ordering Information
Please contact your local field sales engineer or one of
Avago Technologies franchised distributors for ordering
information. For technical information, please visit Avago
Technologies ’ WEB page at www.avagotech.com. For in-
formation related to XFP MSA documentation visit www.
xfpmsa.org
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2008 Avago Technologies. All rights reserved.
AV02-1079EN - November 26, 2008