AFCT-711XPDZ Datasheet, PDF (1/15 Pages) AVAGO TECHNOLOGIES LIMITED – Multi-rate 1310 nm XFP 10 Gbit/s Optical Transceiver

AFCT-711XPDZ
Multi-rate 1310 nm XFP 10 Gbit/s Optical Transceiver
Data Sheet
Description
The 1310 nm XFP transceiver is a high performance, cost
effective module for serial optical data communications
applications specified for signal rates of 9.95 Gb/s to 11.3
Gb/s. It is compliant to XFP MSA Rev 4.5. The module is
designed for single mode fiber and operates at a nominal
wavelength of 1310 nm. The transmitter section incorpo-
rates a directly modulated 1310 nm distributed feedback
laser (DFB). The receiver section uses an MOVPE grown
planar TEDET PIN photodetector for low dark current and
excellent responsivity. Integrated Tx and Rx eye openers
provide high jitter-tolerance and low jitter-generation
and transfer for full XFI and SONET compliance. The
internally AC coupled high speed serial I/O simplifies
interfacing to external circuitry. The electrical interface
is made using an industry standard 0.8 mm pitch 30-pin
right angle connector. Optical connection is made via the
duplex LC connector.
Applications
• Fibre Channel Switches
• Host Bus Adapter Cards
• Mass Storage System and Server I/O
• Optical Cross Connect Switches
- Next generation SONET/SDH ADMs
- Core Routers
Related Products
• AFCT-721XPDZ: 10GbE/10GFC 1310nm XFP 10Gbit/s
Optical Transceiver
• AFBR-720XPDZ: 10GbE 850nm XFP 10Gbit/s Optical
Transceiver
Features
• RoHS-6 Compliant
• Supports 9.95Gb/s to 11.3Gb/s bit rates
• Compliant to XFP MSA
• Multi-protocol multi-bitrate
-SONET/SDH OC-192/STM-64 rate 9.9532 Gb/s,
Telcordia GR-253-CORE SR-1, ITU-T G.691 I64.1
-IEEE 802.3ae 10GBASE-LR for 10GbE, 10.3125 Gb/s
-10GFC 1310 nm Serial PMD, type 1200-SM-LL-L,
10.51875 Gb/s
• Uncooled 1310 nm DFB Laser and PIN Photodiode
• Compliant XFI 10G Serial electrical interface
• LC Duplex optical connector interface conforming to
ANSI TIA/EIA604-10 (FOCIS 10)
• 1.5W typical power dissipation
• No Reference Clock required
• Superior Thermal and EMI performance to support
high port densities
• Customizable clip-on heatsink to support a variety
of line card environments
• -5 to +70 °C case operating temperature range
• Support XFI loopback
• 2-wire serial management interface provides real
time monitors of:
- Transmitted Optical Power
- Received Optical Power
- Laser Bias Current
- Module Temperature
- Supply Voltage
• Link Lengths up to 10 km with 9 µm SMF
• IEC 60825-1 Class 1/CDRH Class 1 laser eye safe