HCPL-314J_11 Datasheet, PDF (14/14 Pages) AVAGO TECHNOLOGIES LIMITED – 0.4 Amp Output Current IGBT Gate Drive Optocoupler

I_LED1
V_OUT1
V_OUT2
Q1 ON
Q2 OFF
Q1 OFF
Q2 ON
I_LED2
t_{PHL MAX}
t_{PLH MIN}
PDD* MAX = (t_PHL- t_PLH)_MAX = t_{PHL MAX} - t_{PLH MIN}
*PDD = PROPAGATION DELAY DIFFERENCE
NOTE: FOR PDD CALCULATIONS THE PROPAGATION DELAYS
ARE TAKEN AT THE SAME TEMPERATURE AND TEST CONDITIONS.
Figure 26. Minimum LED Skew for Zero Dead Time.
I_LED1
V_OUT1
V_OUT2
Q1 ON
Q2 OFF
Q1 OFF
Q2 ON
I_LED2
t_{PHL MIN}
t_{PHL MAX}
(t_PHL-t_PLH) _MAX
t_PLH
MIN
t_{PLH MAX}
PDD* MAX
MAXIMUM DEAD TIME
(DUE TO OPTOCOUPLER)
= (t_{PHL MAX} - t_{PHL MIN}) + (t_{PLH MAX} - t_{PLH MIN})
= (t_{PHL MAX} - t_{PLH MIN}) – (t_{PHL MIN} - t_{PLH MAX})
= PDD* MAX – PDD* MIN
*PDD = PROPAGATION DELAY DIFFERENCE
NOTE: FOR DEAD TIME AND PDD CALCULATIONS ALL PROPAGATION
DELAYS ARE TAKEN AT THE SAME TEMPERATURE AND TEST CONDITIONS.
Figure 27. Waveforms for Dead Time.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5989-2943EN
AV02-0169EN - March 28, 2011