AFBR-709DMZ Datasheet, PDF (12/22 Pages) AVAGO TECHNOLOGIES LIMITED – SFP+ Transceiver

Table 8a. 10GBd Optical Specifications - Transmitter
The following characteristics are defined over the Recommended Operating Conditions unless otherwise noted.
Typical values are for Tc = 40°C. VccT and VccR = 3.3 V.
Parameter
Minimum Typical Maximum Units
Notes
Laser OMA output power
-4.3
dBm
1, 2, 3, See Table 9
Laser mean output power

-1.0
dBm
1, 2, 4
Laser off power
-30
dBm
1
Extinction ratio
3.0
dB
1, 2
Transmitter and dispersion penalty (TDP)
3.9
dB
1
Center Wavelength
840
860
nm
1,3, See Table 9
RMS spectral width, standard deviation
1,3, See Table 9
RIN₁₂OMA
-128
dB/Hz
1
Optical Return Loss Tolerance
12
dB
1
Encircled Flux 5
Transmitter Output Eye Mask
1, See Figure 5b
General Specification Considerations (Notes):
1. IEEE 802.3ae Clause 52 compliant.
2. These parameters are interrelated: see IEEE 802.3ae, Clause 52.
3. See Table 9. Trade-offs are available among spectral width, center wavelength, and minimum optical modulation amplitude.
4. The 10GBASE-SR launch power shall be the lesser of the Class 1 safety limit as defined in IEEE 802.3ae 52.10.2 or the average receive power
maximum defined by IEEE 802.3ae -2002 Table 52-9.
5. The transceiver’s launch condition meets the requirement of 10 Gigabit Ethernet multimode fiber as detailed in TIA 492AAAC.
6. Vertical eye closure penalty and Stressed eye jitter are test conditions for Stressed sensitivity (OMA) measurements.
Table 8b. 1.25GBd Optical Characteristics - Transmitter
Parameter
Output Optical Power (Average)
Optical Extinction Ratio
Symbol
P_OUT
ER
Minimum
-9.5
9
Total Jitter (TP1 to TP2 Contribution
TJ
Typical
-6.5
12
Coupled Power Ratio
CPR
9
Notes:
1. 50/125 µm fiber with NA = 0.2, 62.5/125 µm fiber with NA = 0.275.
Maximum Unit
-1
dBm
dB
227
ps
0.284
UI
dB
Notes
1
12