AFBR-709DMZ Datasheet, PDF (1/22 Pages) AVAGO TECHNOLOGIES LIMITED – SFP+ Transceiver

AFBR-709DMZ
10Gb/1Gb Ethernet, 850nm
SFP+ Transceiver
Data Sheet
AFBR-709DMZ
Description
The Avago AFBR-709DMZ transceiver is part of a family
of SFP+ products. This transceiver utilizes Avago’s 850nm
VCSEL and PIN Detector technology to provide an IEEE
10Gb Ethernet design compliant with the 10GBASE-SR
/SW standard and allows the operation at 1.25GBd for
Gigabit Ethernet application. The AFBR-709DMZ trans-
ceiver is designed to enable 10Gb Ethernet equipment
designs with very high port density based on the new
electrical and mechanical specification enhancements
to the well known SFP specifications developed by the
SFF Committee. These specifications are referred to as
SFP+ to recognize these enhancements to previous SFP
specifications used for lower speed products. Avago
Technologies is an active participant in the SFF Commit-
tee specification development activities.
Related Products
• AFCT-701SDDZ SFP+ 10Gb/1Gb Gigabit Ethernet
10GBASE-LR transceiver for operation in SMF link
applications to 10 km
• AFBR-709SMZ (AFBR-709ASMZ) SFP+ 10 Gigabit
Ethernet 10GBASE-SR transceiver with case tempe-
rature 0-70°C (0-85°C) for use on multimode fiber
cables. It is best suited for OM3 high bandwidth MMF
link applications with link lengths up to 300 meters.
• AFBR-707SDZ SFP+ 10 Gigabit Ethernet 10GBASE-
LRM transceiver for 220 meter operation in all MMF
link applications including OM1 and OM2 legacy fiber
cables and new high bandwidth OM3 fiber cables.
• AFCT-701SDZ (AFCT-701ASDZ) SFP+ 10 Gigabit
Ethernet 10GBASE-LR transceiver with case tempe-
rature 0-70°C (0-85°C) for operation in SMF link
applications to 10 km
• AFCT-5016Z SFP+ Evaluation Board The purpose of
this SFP+ evaluation board is to provide the designer
with a convenient means for evaluating SFP+ fiber
optic transceivers.
Features
• Avago 850nm VCSEL source and Transmitter Optical
Subassembly technology
• Avago PIN detector and Receiver Optical Subassembly
technology
• Typical power dissipation 600mW
• Full digital diagnostic management interface
• Avago SFP+ package design enables equipment EMI
performance in high port density applications with
margin to Class B limits
• Flexibility in data rate selection through either
hardware or software control
Specifications
• Optical interface specifications per IEEE 802.3ae
10GBASE-SR and 10GBASE-SW
• Compliant to the transmitter extinction ratio and
the receiver sensitivity specs per IEEE 802.3 Gigabit
Ethernet (1.25GBd) 1000BASE-SX
• Electrical interface specifications per SFF Committee
SFF 8431 Specifications for Enhanced 8.5 and 10
Gigabit Small Form Factor Pluggable Module “SFP+”
• Management interface specifications per SFF
Committee SFF 8431 and SFF 8472 Diagnostic
Monitoring Interface for Optical Transceivers
• Mechanical specifications per SFF Committee SFF
8432 Improved Pluggable Formfactor “IPF”
• LC Duplex optical connector interface confirming to
ANSI TIA/EA 604-10 (FOCIS 10A)
• Compliant to Restriction on Hazardous Substances
(RoHS) per EU and China requirements
• Compliant to halogen free requirements
• Class 1 Eye safe per requirements of IEC 60825-1 /
CDRH
Patent - www.avagotech.com/patents