AFBR-79EQDZ_15 Datasheet, PDF (10/19 Pages) AVAGO TECHNOLOGIES LIMITED – Parallel Fiber-Optics Module

Regulatory Compliance Table
Feature
Electrostatic Discharge
(ESD) to the Electrical
Contacts
Electrostatic Discharge (ESD)
to Optical connector
Electrostatic Discharge
(ESD) to Optical Connector
Electromagnetic Interference
(EMI)
Immunity
Test Method
JEDEC Human Body Model (HBM)
(JESD22-A114-B)
JEDEC Charge Device Model (CDM)
(JESD22-C101D)
GR1089
Variation of EN 61000-4-2
FCC Part 15 CENELEC EN55022
(CISPR 22A) VCCI Class A
Variation of EN 61000-4-3
Laser Eye Safety and
Equipment Type Testing
Component Recognition
RoHS Compliance
EN 60825-1:2007 and
EN 60950-1:2006+A11+A1+A12
Underwriters Laboratories and Canadian
Standards Association Joint Component
Recognition for Information Technology
Equipment including Electrical Business
Equipment
BS EN 1122:2001 Mtd B by ICP for Cadmium,
EPA Method 3051A by ICP for Lead and
Mercury, EPA Method 3060A & 7196A by
UV/Vis Spectrophotometry for Hexavalent
Chromium. EPA Method 3540C/3550B by
GC/MS for PPB and PBDE
Performance
Transceiver module withstands 1kV on high
speed pins and 2kV on low speed pins
Transceiver module withstands 250V
10 discharges of 8 kV on the electrical faceplate
with device inserted into a panel
Air discharge of 15kV(min) to connector w/o
damage
Typically passes with 10 dB margin. Actual
performance dependent on enclosure design
Typically minimum effect from a 10V/m field
swept from 80 MHz to 1 GHz applied to the
module without a chassis enclosure
EN AEL & US FDA CDRH Class 1M
UL File Number: E173874
Less than 100 ppm of cadmium,
Less than 1000 ppm of lead, mercury,
hexavalent chromium, polybrominated
biphenyls, and polybrominated biphenyl esters.
BS EN method by ICP and EPA methods by ICP,
UV/Vis Spectrophotometry and GC/MS.
10