|
HCPL-3150 Datasheet, PDF (1/22 Pages) Agilent(Hewlett-Packard) – 0.5 Amp Output Current IGBT Gate Drive Optocoupler | |||
|
HCPL-3150 (Single Channel), HCPL-315J (Dual Channel)
0.5 Amp Output Current IGBT Gate Drive Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-315X consists of an LED optically coupled
to an integrated circuit with a power output stage. This
optocoupler is ideally suited for driving power IGBTs and
MOSFETs used in motor control inverter applicaÂtions.
The high operating voltage range of the output stage
proÂvides the drive voltages required by gate controlled
devices. The voltage and current supplied by this opto-
coupler makes it ideally suited for directly driving IGBTs
with ratings up to 1200 V/50 A. For IGBTs with higher rat-
ings, the HCPL-3150/315J can be used to drive a discrete
power stage which drives the IGBT gate.
Applications
⢠Isolated IGBT/MOSFET gate drive
⢠AC and brushless dc motor drives
⢠Industrial inverters
⢠Switch Mode Power Supplies (SMPS)
⢠Uninterruptable Power Supplies (UPS)
Functional Diagram
Features
⢠0.6A maximum peak output current
⢠0.5 A minimum peak output current
⢠15 kV/µs minimum Common Mode Rejection (CMR)
at VCM = 1500 V
⢠1.0âV maximum low level output voltage (VOL)
eliminates need for negative gate drive
⢠ICC = 5 mA maximum supply current
⢠Under Voltage Lock-Out protection (UVLO) with
hysteresis
⢠Wide operating VCC range: 15 to 30 volts
⢠0.5 µs maximum propagation delay
⢠+/â 0.35 µs maximum delay between
devices/channels
⢠Industrial temperature range:-40°C to 100°C
⢠HCPL-315J: channel one to channel two output
isolation = 1500 Vrms/1 min.
⢠Safety and regulatory approval:
UL recognized (UL1577), 3750 Vrms/1 min.
IEC/EN/DIN EN 60747-5-2 approved
VIORM = 630 Vpeak (HCPL-3150 option 060 only)
VIORM = 891 Vpeak (HCPL-315J) CSA certified
N/C 1
ANODE 2
CATHODE 3
N/C 4
SHIELD
HCPL-3150
8 VCC
7 VO
6 VO
5 VEE
N/C 1
ANODE 2
CATHODE 3
SHIELD
ANODE 6
CATHODE 7
N/C 8
SHIELD
HCPL-315J
16 VCC TRUTH TABLE
15 VO
14 VEE LED
OFF
ON
11 VCC
ON
ON
âPosiVtCiCv-eVGEEoingâ
(i.e., Turn-On)
0 - 30 V
0 - 11 V
11 - 13.5 V
13.5 - 30 V
10 VO
9 VEE
âNegaVtCiCv-eV-EGE oingâ
(i.e., Turn-Off)
0 - 30 V
0 - 9.5 V
9.5 - 12 V
12 - 30 V
VO
LOW
LOW
TRANSITION
HIGH
A 0.1 µF bypass capacitor must be connected between the VCC and VEE pins for each channel.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
|
▷ |