AFBR-732BZ Datasheet, PDF (1/22 Pages) AVAGO TECHNOLOGIES LIMITED – Ultra Short Link Pluggable Parallel Fiber Optic Modules, Transmitter and Receiver

AFBR-732BZ/BEZ/BEHZ and
AFBR-742BZ/BEZ/BEHZ
Ultra Short Link Pluggable Parallel Fiber Optic Modules,
Transmitter and Receiver
Data Sheet
Description
The AFBR-732BZ transmitter and AFBR-742BZ
receiver are high performance fiber optic
modules for parallel optical data communication
applications. These 12-channel devices, operating
up to 2.5Gbd per channel, provide a cost
effective solution for short-reach applications
requiring up to 30 Gb/s aggregate bandwidth.
These modules are designed to operate on
multimode fiber systems at a nominal wavelength
of 850 nm. They incorporate high performance,
highly reliable, short wavelength optical devices
coupled with proven circuit technology to
provide long life and consistent service.
The AFBR-732BZ transmitter module
incorporates a 12- channel VCSEL (Vertical
Cavity Surface Emitting Laser) array together
with a custom 12-channel laser driver integrated
circuit providing IEC-60825 and CDRH Class 1M
laser eye safety.
The AFBR-742BZ receiver module contains a 12-
channel PIN photodiode array coupled with a
custom preamplifier / post amplifier integrated
circuit.
Operating from a single +3.3 V power supply,
both modules provide LVTTL or LVCMOS control
interfaces and Current Mode Logic (CML)
compatible data interfaces to simplify external
circuitry.
The transmitter and receiver devices are housed
in MTP®/MPO receptacled packages. Electrical
connections to the devices are achieved by
means of a pluggable 10 x 10 connector array.
Features
• RoHSCompliant
• Low cost per Gb/s
• High package density per Gb/s
• 3.3 volt power supply for low power consumption
• 850 nm VCSEL array source
• 12 independent channels per module
• Separate transmitter and receiver modules
• 2.5 Gbd data rate per channel
• Standard MTP® (MPO) ribbon fiber connector interface
• Pluggablepackage
• 50/125 micron multimode fiberoperation:
Distance up to 50 m with 50um,
500 MHz.km fiber at 2.5 Gbd
• Data I/O is CML compatible
• Control I/O is LVTTL compatible
• Manufactured in an ISO 9002 certified facility
Applications
• Proprietary Ultra short link interconnects
Ordering Information
The AFBR-732BZ and AFBR-742BZ products are
available for production orders through the
Avago Component Field Sales office.
AFBR-732BZ No EMI Nose Shield, with Heatsink
AFBR-742BZ No EMI Nose Shield, with Heatsink
AFBR-732BEZ With EMI Nose Shield, with Heatsink
AFBR-742BEZ With EMI Nose Shield, with Heatsink
AFBR-732BEHZ With EMI Nose Shield, No Heatsink
AFBR-742BEHZ With EMI Nose Shield, No Heatsink