ACPL-352J Datasheet, PDF (1/26 Pages) AVAGO TECHNOLOGIES LIMITED – 5.0 A maximum peak output current

ACPL-352J
5.0 Amp Output Current IGBT and SiC/GaN MOSFET Gate Drive
Optocoupler with Integrated Over Current Sensing,
FAULT, GATE and UVLO Status Feedback
Data Sheet
Description
The ACPL-352J is a 5.0A intelligent gate drive optocoupler. The
high peak output current and wide operating voltage range
make it ideal for driving IGBT or SiC/GaN MOSFET directly in
motor control and inverter applications.
The device features fast propagation delay with excellent
timing skew performance. It provides IGBT/MOSFET with over
current protection and functional safety reporting. This
full-featured and easy-to-implement gate drive optocoupler
comes in a compact, surface-mountable SO-16 package. It
provides reinforced insulation certified for safety regulatory
IEC/EN/DIN, UL and CSA.
CAUTION
It is advised that normal static precautions be
taken in handling and assembly of this
component to prevent damage and/or
degradation which may be induced by ESD. The
components featured in this data sheet are not
to be used in military or aerospace applications
or environments.
Features
 5.0 A maximum peak output current
 4.5 A minimum peak output current
 150 ns maximum propagation delay
 Dual output drive to control turning on and off time
 Over current detection with configurable "Soft" shutdown
 Functional Safety Reporting
— Over current FAULT feedback
— IGBT/MOSFET GATE status feedback
— UVLO status feedback
 Under Voltage Lock-Out (UVLO) with Hysteresis
 50 kV/μs Minimum Common Mode Rejection (CMR) at
V_CM = 1500 V
 15V to 30V wide operating V_DD2 range
 –40°C to 105°C industrial temperature range
 8.3mm creepage and clearance
 Safety approval:
— UL Recognized 5000 V_RMS for 1min.
— CSA
— IEC/EN/DIN EN 60747-5-5 V_IORM = 1414 V_PEAK
Applications
 IGBT and SiC/GaN MOSFET gate drive
 Industrial drives and inverters
 Renewable energy inverters
 Switching power supplies
Avago Technologies
-1-