ACPL-31JT Datasheet, PDF (1/20 Pages) AVAGO TECHNOLOGIES LIMITED – Miller Clamp Sinking Current

ACPL-31JT
Automotive 2.5 Amp MOSFET Gate Drive Optocoupler
with Integrated Desat Over Current Sensing,
Miller Current Clamping and Under Voltage Lock-Out Feedback
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Avago’s Automotive 2.5Amp Gate Drive Optocoupler fea-
tures fast propagation delay with excellent timing skew
performance. Smart features that are integrated to protect
the MOSFET include desaturation sensing with shutdown
protection and fault feedback, under voltage lockout
and feedback and active Miller current clamping. This full
featured and easy-to-implement gate drive optocoupler
comes in a compact, surface-mountable SO-16 package
for space-savings. It is ideally designed for driving power
MOSFETs used in AC-DC and DC-DC converters and satis-
fies automotive AEC-Q100 semiconductor requirements.
Avago R²Coupler isolation products provide reinforced
insulation and reliability that delivers safe signal isolation
critical in automotive and high temperature industrial ap-
plications.
Functional Diagram
VE VCC2
13 12
VCC1 3
15 LED2+
UVLO
/UVLO 5
/FAULT 6
VEE1 1
Input
Driver
Output
Driver
Over
Current
14 DESAT
11 VO
AN 7
10 CLAMP
CA 8
Miller Control
Figure 1. ACPL-31JT Functional Diagram
9 16
VEE2 VEE2
Features
• Qualified to AEC-Q100 Grade 1 Test Guidelines
• Automotive temperature range: -40°C to +125°C
• Common Mode Rejection (CMR): >50kV/μs at V_CM =
1500 V
• High Noise Immunity
- Miller Current Clamping
- Direct LED input with low input impedance and low
noise sensitivity
- Negative Gate Bias
• Peak output current: 2.5 A max.
• Miller Clamp Sinking Current: 1.9 A max.
• Wide Operating Voltage: 12V to 20V
• Propagation delay: 250 ns max.
• Dead Time Distortion: -100 ns to +15 ns
• Integrated fail-safe MOSFET protection
• Desat sensing, turn-off protection and Fault Feedback
• Under Voltage Lock-Out protection (UVLO) with
Feedback
• SO-16 package with 8mm clearance and creepage
• Regulatory approvals:
UL1577, CSA
IEC/EN/DIN EN 60747-5-5
Applications
• Automotive Isolated MOSFET gate drive
• Automotive DC-DC Converter
• Switching Power Supplies
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this
component to prevent damage and/or degradation which may be induced by ESD. The components
featured in this datasheet are not to be used in military or aerospace applications or environments.