ACML-7400-000E Datasheet, PDF (1/13 Pages) AVAGO TECHNOLOGIES LIMITED – 3.3 V/5 V 100 MBd High Speed CMOS Digital Isolator

ACML-7400, ACML-7410 and ACML-7420
3.3 V/5 V 100 MBd High Speed CMOS Digital Isolator
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
ACML-7400, ACML-7410 and ACML-7420 are multi-channel
high speed CMOS digital isolators. Using magnetic
coupling through a thick insulation barrier, the isolators
enable high speed transmissions without compromise
in isolation performance. These isolators consume low
power even at high data rates, yet provide excellent
transient immunity performance in compact surface
mount packages. The devices are qualified to a maximum
propagation delay of 36 ns and a maximum pulse width
distortion of 3 ns. They are capable of running at a 100
MBaud data rate
ACML-7400, ACML-7410 and ACML-7420 are available in
16-pin SOIC wide-body packages. They operate at dual
3.3 V/5 V supply voltages. The DC and timing specifica-
tions are specified over the temperature range of -40° C
to +105° C. ACML-7400, ACML-7410 and ACML-7420 are
built using CMOS input buffers and CMOS output drivers
to eliminate the need for both input limiters and output
pull-up resistors. Refresh circuitry is built in to ensure
DC-correctness.
Applications
 Isolated data interfaces
 Data acquisition
 Digital oscilloscopes
 Power meters
 High speed video transmission
Features
 Dual supply voltage compatible – 3.3 V & 5 V
 Wide operating temperature range (-40° C to +105° C)
 Support high speed data rate of at least 100 MBd
 Lower power consumption – 15 mA per channel typical
 Low propagation delay: 36 ns max
 Low propagation delay skew
– Channel-to-channel: 4 ns max
– Part-to-part: 8 ns max
 Low pulse width distortion: 3 ns max
 Safety and Regulatory Approvals
UL Recognised
– 5600 V_RMS for 1 min. per UL1577
– CSA Component Acceptance Notice #5
IEC 60950-1
– Basic Insulation, 800 V_RMS max. working voltage
– Reinforced Insulation, 400 V_RMS max. working
voltage
IEC 61010-1
– Basic Insulation, 800 V_RMS max. working voltage
– Reinforced Insulation, 400 V_RMS max. working voltage
IEC 60601-1
– 2 Means of Patient Protection, 250 V_RMS max.
working voltage
– 2 Means of Operator Protectioin, 400 V_RMS max.
working voltage
 High Common Mode Transient Immunity – 25 kV/s min
 CMOS buffer input and output
 DC correctness
 Lead-free
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.