ABA-52563 Datasheet, PDF (1/8 Pages) Agilent(Hewlett-Packard) – 3.5 GHz Broadband Silicon RFIC Amplifier

ABA-52563
3.5 GHz Broadband Silicon RFIC Amplifier
Data Sheet
Description
Avago’s ABA-52563 is an ­economical, easy-to-use, inter-
nally 50-ohm matched silicon monolithic amplifier that
offers ­excellent gain and flat broadband response from
DC to 3.5 GHz. Packaged in an ultraminiature industry-
standard SOT-363 ­package, it requires half the board
space of a SOT-143 ­package.
At 2 GHz, the ABA-52563 offers a small-signal gain of
21.5 dB, output P1dB of 9.8 dBm and 19.9 dBm output third
order ­intercept point. It is suitable for use as buffer ampli-
fiers for wideband applications. They are designed for low
cost gain blocks in cellular applications, DBS tuners, LNB
and other wireless communications systems.
ABA-52563 is fabricated using Avago’s HP25 silicon
bipolar process, which employs a double-diffused single
polysilicon process with self-aligned submicron emitter
geometry. The process is capable of simultaneous high f_T
and high NPN breakdown (25 GHz f_T at 6V BVCEO). The
process utilizes ­industry standard device oxide isolation
technologies and ­submicron aluminum multilayer inter-
connect to achieve ­superior performance, high uniformity,
and proven reliability.
Features
• Operating frequency: DC ~ 3.5 GHz
• 21.5 dB gain
• VSWR < 2.0 throughout operating frequency
• 9.8 dBm output P1dB
• 3.3 dB noise figure
• Unconditionally stable
• Single 5V supply (Id = 35 mA)
• Lead-free option available
Applications
• Amplifier for cellular, cordless, special mobile radio,
PCS, ISM, wireless LAN, DBS, TVRO, and TV tuner
applications
Surface Mount Package: SOT-363/SC70
Simplified Schematic
Vcc
RF
Output
& Vcc
Pin Connections and Package Marking
GND 2
GND 1
Output
& Vcc
GND 3
Input
Vcc
Note:
Top View. Package marking provides orientation and identification.
“x” is character to identify date code.
RF
Input
Ground 1
Ground 3
Ground 2