TH7887A Datasheet, PDF (7/21 Pages) ATMEL Corporation – Area Array CCD Image Sensor 1024 x 1024 Pixels with Antiblooming

TH7887A
Absolute Maximum Ratings*
Storage Temperature .................................... -55°C to + 150°C
Operating Temperature............................... -40°C to + 85°C
Thermal Cycling.........................................................15°C/mm
Maximum Applied Voltages:
A2, A6, B2, C5, B5, C3, A5, C2, A3, A7, B7, C4
B4, C6, C7, A4, V7, W8, V8, AA8, V6, AA5.......... -0.3V to 15V
V2, V3, V4, V5, W2, W3, W4, W5
W6, C1, AA6 ......................................................-0.3V to 15.5V
C8 ......................................................................... -0.3V to 12V
AA7, V1, W1, W7, A8, B8, B6, B1, A1, B3 ............. Ground 0V
*NOTICE:
Stresses above those listed under absolute max-
imum ratings may cause permanent device fail-
ure. Functionality at or above these limits is not
implied. Exposure to absolute maximum ratings
for extended periods may affect device reliability.
Operating Range
The operating range defines the limits where function is guaranteed.
Electrical limits of applied signals are given in the operating conditions section.
Operating
Precautions
Shorting the video outputs to any other pin, even temporarily, can permanently damage
the on-chip output amplifier.
Operating Conditions
Table 1. DC Characteristics
Parameter
Symbol
Min
Output amplifier drain supply
VDD1, VDD2,
VDD3, VDD4
14.5
Screen voltage
VDDP
14.5
Reset bias
VDR
14.5
Antiblooming diode bias
VA
14.5
Register output gate bias
VGS
2.2
Output amplifier source supply
VS1,2,3,4
–
Ground
VSS
–
Value
Typ
15
15
15
15
2.5
0
0
Max
Unit
15.5
V
15.5
V
15.5
V
15.5
V
2.8
V
–
V
–
V
7
2146A–IMAGE–05/02