AT91SAM9XE_14 Datasheet, PDF (463/846 Pages) ATMEL Corporation – Atmel | SMART ARM-based Embedded MPU

0 = No effect.
1 = If SVDIS = 0, the slave mode is enabled.
Note: Switching from Master to Slave mode is only permitted when TXCOMP = 1.
• SVDIS: TWI Slave Mode Disabled
0 = No effect.
1 = The slave mode is disabled. The shifter and holding characters (if it contains data) are transmitted in case of read oper-
ation. In write operation, the character being transferred must be completely received before disabling.
• QUICK: SMBUS Quick Command
0 = No effect.
1 = If Master mode is enabled, a SMBUS Quick Command is sent.
• SWRST: Software Reset
0 = No effect.
1 = Equivalent to a system reset.
AT91SAM9XE Series [DATASHEET]
Atmel-6254D-ATARM-AT91SAM9XE-Datasheet_29-Oct-14
463