ATAM510 Datasheet, PDF (38/72 Pages) ATMEL Corporation – MARC4 4-bit MTP Universal Microcontroller

3.5.1.2
Timer/Counter Interrupt Priority Register (TCIP)
The Timer/Counter Interrupt Priority register (TCIP) is used to configure Timer 0 and Timer 1
interrupt priority levels.
Subport address (indirect write access): '7'hex of Port address '9'hex
TCIP
Bit 3
T1IP2
Bit 2
T1IP1
Bit 1
T0IP2
Bit 0
T0IP1
Reset value: 1111b
T0IP2, T0IP1 - Timer 0 Interrupt Priority code
T1IP2, T1IP1 - Timer 1 Interrupt Priority code
3.5.1.3
Table 3-10. Timer/Counter Interrupt Priority Register (TCIP)
Code
3210
xx11
xx10
xx01
xx00
11xx
10xx
01xx
00xx
Function
Timer 0 interrupt priority 1
Timer 0 interrupt priority 3
Timer 0 interrupt priority 5
Timer 0 interrupt priority 7
Timer 1 interrupt priority 0
Timer 1 interrupt priority 2
Timer 1 interrupt priority 4
Timer 1 interrupt priority 6
Timer/Counter I/O Control Register (TCIOR)
Subport address (indirect write access): '5'hex of Port address '9'hex
TCIOR
Bit 3
TCIO3
Bit 2
TCIO2
Bit 1
TCIO1
Bit 0
TCIO0
Reset value: 1111b
TCIO3...0 - Timer/Counter I/0 mode select
38 ATAM510
4711B–4BMCU–01/05