AT22V10 Datasheet, PDF (2/11 Pages) ATMEL Corporation – High Speed UV Erasable Programmable Logic Device

Absolute Maximum Ratings*
Temperature Under Bias.................-55^oC to +125^oC
Storage Temperature......................-65^oC to +150^oC
Voltage on Any Pin with
Respect to Ground........................ -2.0 V to +7.0 V⁽¹⁾
Voltage on Input Pins
with Respect to Ground
During Programming................... -2.0 V to +14.0 V⁽¹⁾
Programming Voltage with
Respect to Ground...................... -2.0 V to +14.0 V⁽¹⁾
Integrated UV Erase Dose .............. 7258 W•sec/cm²
*NOTICE: Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these
or any other conditions beyond those indicated in the operational
sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect de-
vice reliability.
Note:
1. Minimum voltage is -0.6 V dc which may undershoot to -2.0 V
for pulses of less than 20 ns. Maximum output pin voltage is
VCC+0.75 V dc which may overshoot to +7.0 V for pulses of less
than 20 ns.
Logic Options
Output Options
OE
From
Logic
Option
To
Output
From
Output
I/O
SP
D
Q
CK
Q
AR
To
Output
OE
From
Logic
I/O
Option
D.C. and A.C. Operating Conditions
Operating Temperature (Case)
VCC Power Supply
Commercial AT22V10/L
-15, -20, -25
0^oC - 70^oC
5 V ± 10%
Industrial AT22V10/L
-15, -20, -25
-40^oC - 85^oC
5 V ± 10%
Military AT22V10/L
-15, -20, -25, -30
-55^oC - 125^oC
5 V ± 10%
1-98
AT22V10/L