AT16244F Datasheet, PDF (2/6 Pages) ATMEL Corporation – AT16244 Fast Logic 16-Bit Buffer/Line Driver

Function Table⁽¹⁾
Inputs
xOE
xAχ
L
L
L
H
H
X
Note: 1. X = Don’t Care, Z = High Impedance
Outputs
xYχ
L
H
Z
Absolute Maximum Ratings*
Operating Temperature ........................ 0°C to +70°C
Storage Temperature ...................... -65°C to +150°C
Voltage on any Pin
with Respect to Ground...................-2.0V to +7.0V⁽¹⁾
*NOTICE: Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional
operation of the device at these or any other conditions
beyond those indicated in the operational sections of
this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may
affect device reliability.
Maximum Operating Voltage.............................. 6.0V
5.0 Volt DC Characteristics
Notes: 1. Minimum voltage is -0.6V dc which may undershoot
to -2.0V for pulses of less than 20 ns. Maximum
output pin voltage is V_CC +0.75V dc which may
overshoot to +7.0V for pulses of less than 20 ns.
Applicable over recommended operating range from T_a = 0°C to +70°C, V_CC = +5.0V +/- 5% (unless otherwise noted)
Symbol
Parameter
Test Conditions
Min Typ Max ^Units
∆I_CC
Quiescent Power Supply
Current
V_CC = Max, V_IN = 3.4V
V_IH
Input High Voltage
2.0
V_IL
Input Low Voltage
IIH
Input High Current (I/O Pins)
VIN = VCC
I_IL
Input Low Current (I/O Pins)
V_IN = GND
I_OZ
Output Leakage Current
V_OH(1)
Output High Voltage
V_CC = 4.75V
2.7
F Grade only
I_OH = -10 mA
V_OH(2)
Output High Voltage
V_CC = 4.75V
2.7
G Grade only
I_OH = -12 mA
V_OL
Output Low Voltage (F Grade)
I_OL = 10 mA
V_OL
Output Low Voltage (G Grade)
I_OL = 12 mA
Note: 1. F grade: At V_{CC (max)}, the value of V_OH(max) = 3.75V and at V_CC(min), V_OH(max) = 3.25V
2. G grade: At V_{CC (max)}, the value of V_OH(max) = 3.75V and at V_CC(min), V_OH(max) = 3.35V
0.8 1.2 mA
V
0.8 V
±15 µA
±15 µA
±10 mA
V
V
0.55 V
0.55 V
5-4
AT16244