U3761MB-T Datasheet, PDF (12/27 Pages) ATMEL Corporation – Universal Telephone IC - All Functions Integrated

Number Store
Repertory Dialing
Notice (N)
Cascaded Dialing
Example:
OFF/ HOOK, D1, D2, ... Dn
a) ON/OFF-HOOK, R/P, N.
D1, ... Dn copied to N
b) ON/OFF-HOOK, R/P, S, S, Mn (or Ln) D1, ... Dn copied to Mn (or Ln)
but
OFF/ HOOK, M1
content of M1 will be dialed out
a) ON/OFF-HOOK, R/P, S, S, M2
b) ON/OFF-HOOK, M1, S, S, M2
not possible, M2 will be erased
not possible, M2 will be erased
OFF HOOK , D1 , D2 , ..., Dn , S , S , Mn (or Ln)
1. D1, D2, ..., Dn will be stored in memory location only (not in redial memory) and
dialed out.
OFF HOOK S , D1 , D2 , ..., Dn , S , Mn (or Ln)
2. D1, D2, ..., Dn will be stored in memory location but will not be dialed out.
3. R/P and */T keys can be stored as a digit in memory, also F1, F2, F3, Earth. In
store mode, R/P is the pause function key; */T is the pulse-to-tone function key.
4. The store mode is released after the store function is executed or when the state
of the hook switch is changed.
5. Number store can be linked without going ON/OFF-Hook
Example:
OFF/HOOK
S, D1, D2, ... Dn, S, M1
storing D1, D2, ... Dn to M1
S, D1', D2', ... Dn', S, M2 ... storing D1', D2', ... Dn' to M2
1. OFF HOOK , Mn
2. OFF HOOK , A , Ln
OFF HOOK D1 , D2 , ..., Dn , N
1. If the dialing of D1 to Dn is finished, pressing the N key will cause D1 to Dn to be
copied to the N memory.
2. Pressing key N again, after D1, D2, ... Dn was copied to N, N will be dialed out
again
OFF HOOK , N
3. D1 to Dn will be dialed out after the N key is pressed.
4. Notice function is valid as first key only.
1. Normal dialing + Repertory dialing + Normal dialing
2. Repertory dialing + Normal dialing + Normal dialing
3. Redialing + Normal dialing + Repertory dialing
4. Redialing is valid as first key-in only.
12 U3761MB-T
4744A–CORD–09/03