ATR2732N3 Datasheet, PDF (1/14 Pages) ATMEL Corporation – Integrated DAB One-chip Front End

Features
• Highly Integrated DAB Front-end Solution Covering Band III and L-band Reception
• Convenient Internal Clock Generation, Single Reference Clock
• Fractional PLL for VHF
• Fully Integrated VCOs
• High-precision Digitally Tunable Reference Oscillator
• Integrated High-performance LNAs
• Very Flexible Programming of the AGC
• Automatically Aligned External Filter Tuning
• Simple Three-wire Digital Control Interface for Easy Handling
• Single Low Voltage (3.3V) Supply Operation
• Low Current Consumption Due to Several Power-down Options
• Small SMD Package (QFN 9 mm × 9 mm)
Applications
• Commercial DAB Receivers
• DAB Receiver Solutions for Car Radio Applications
• Portable DAB Solutions
1. Description
The ATR2732N3 is a front-end monolithic integrated circuit, manufactured using
Atmel^®’s silicon-germanium BiCMOS process (SiGMOS).
The ATR2732N3 carries out all functions of RF and IF processing, as well as the
clock-signal generation for these functions. Therefore, there is an integrated fractional
PLL, which, equivalent to most of the other functions, can be controlled via an external
digital bus. The RF functions include LNA, down-conversion mixing, amplifying, detec-
tion, and gain control. An external SAW filter is required in the signal path after the RF
functions. Additional amplifiers with detection and control functions are integrated IF
functions.
The device offers several tuning support functions, and was created to simplify the
design and manufacturing process. To this end, the number of external components
are minimal.
The part fits perfectly to Atmel’s DAB baseband processor ATR2740.
Integrated DAB
One-chip Front
End
ATR2732N3
Summary
NOTE: This is a summary document.
The complete document is available
under NDA. For more information,
please contact your local Atmel sales
office.
9129AS–DAB–04/08