|
ATA5723 Datasheet, PDF (1/46 Pages) ATMEL Corporation – UHF ASK/FSK Receiver | |||
|
Features
⢠Frequency Receiving Range of (3 Versions)
â f0 = 312.5 MHz to 317.5 MHz or
â f0 = 431.5 MHz to 436.5 MHz or
â f0 = 868 MHz to 870 MHz
⢠30 dB Image Rejection
⢠Receiving Bandwidth
â BIF = 300 kHz for 315 MHz/433 MHz Version
â BIF = 600 kHz for 868 MHz Version
⢠Fully Integrated LC-VCO and PLL Loop Filter
⢠Very High Sensitivity with Power Matched LNA
â ATA5723/ATA5724:
â107 dBm, FSK, BR_0 (1.0 kBit/s to 1.8 kBit/s), Manchester, BER 10E-3
â113 dBm, ASK, BR_0 (1.0 kBit/s to 1.8 kBit/s), Manchester, BER 10E-3
â ATA5728:
â105 dBm, FSK, BR_0 (1.0 kBit/s to 1.8 kBit/s), Manchester, BER 10E-3
â111 dBm, ASK, BR_0 (1.0 kBit/s to 1.8 kBit/s), Manchester, BER 10E-3
⢠High System IIP3
â â18 dBm at 868 MHz
â â23 dBm at 433 MHz
â â24 dBm at 315 MHz
⢠System 1-dB Compression Point
â â27.7 dBm at 868 MHz
â â32.7 dBm at 433 MHz
â â33.7 dBm at 315 MHz
⢠High Large-signal Capability at GSM Band (Blocking â33 dBm at +10 MHz,
IIP3 = â24 dBm at +20 MHz)
⢠Logarithmic RSSI Output
⢠XTO Start-up with Negative Resistor of 1.5 kΩ
⢠5V to 20V Automotive Compatible Data Interface
⢠Data Clock Available for Manchester and Bi-phase-coded Signals
⢠Programmable Digital Noise Suppression
⢠Low Power Consumption Due to Configurable Polling
⢠Temperature Range â40°C to +105°C
⢠ESD Protection 2 kV HBM, All Pins
⢠Communication to Microcontroller Possible using a Single Bi-directional Data Line
⢠Low-cost Solution Due to High Integration Level with Minimum External Circuitry
Requirements
⢠Supply Voltage Range 4.5V to 5.5V
Benefits
⢠Low BOM List Due to High Integration
⢠Use of Low-cost 13 MHz Crystal
⢠Lowest Average Current Consumption for Application Due to Self Polling Feature
⢠Reuse of ATA5743 Software
⢠World-wide Coverage with One PCB Due to 3 Versions are Pin Compatible
UHF ASK/FSK
Receiver
ATA5723
ATA5724
ATA5728
9106EâRKEâ07/08
|
▷ |