|
AT86RF230_14 Datasheet, PDF (1/98 Pages) ATMEL Corporation – Registers and Frame Buffer Accessible through Fast SPI | |||
|
AT86RF230
Features
⢠High Performance RF-CMOS 2.4 GHz Radio Transceiver Targeted for IEEE
802.15.4â¢, ZigBee®, 6LoWPAN, RF4CE, SP100, WirelessHART⢠and ISM
Applications
⢠Industry Leading Link Budget (104 dB):
- Programmable Output Power from -17 dBm up to 3 dBm
- Receiver Sensitivity -101 dBm
⢠Ultra-Low Power Consumption:
- SLEEP: 20 nA
- RX: 15.5 mA
- TX: 16.5 mA (at max Transmit Power of 3 dBm)
⢠Ultra-Low Supply Voltage (1.8V to 3.6V) with Internal Regulator
⢠Optimized for Low BoM Cost and Ease of Production:
- Few External Components Necessary (Crystal, Capacitors and Antenna)
⢠Excellent ESD Robustness
⢠Easy to Use Interface:
- Registers and Frame Buffer Accessible through Fast SPI
- Only Two Microcontroller GPIO Lines Necessary
- One Interrupt Pin from Radio Transceiver
- Clock Output with Prescaler from Radio Transceiver
⢠Radio Transceiver Features:
- 128-byte SRAM for Data Buffering
- Programmable Clock Output to Clock the Host Microcontroller or as Timer
Reference
- Integrated TX/RX Switch
- Fully Integrated PLL with on-chip Loop Filter
- Fast PLL Settling Time
- Battery Monitor
- Fast Power-Up Time < 1 ms
⢠Special IEEE 802.15.4-2003 Hardware Support:
- FCS Computation
- Clear Channel Assessment
- Energy Detection / RSSI Computation
- Automatic CSMA-CA
- Automatic Frame Retransmission
- Automatic Frame Acknowledgement
- Automatic Address Filtering
⢠Industrial Temperature Range:
- -40° C to 85° C
⢠I/O and Packages:
- 32-pin Low-Profile QFN
- RoHS/Fully Green
⢠Compliant to EN 300 328/440, FCC-CFR-47 Part 15, ARIB STD-66, RSS-210
⢠Compliant to IEEE 802.15.4-2003
Low Power
2.4 GHz
Transceiver
for ZigBee,
IEEE 802.15.4,
6LoWPAN,
RF4CE and ISM
Applications
AT86RF230
5131E-MCU Wireless-02/09
1
5131E-MCU Wireless-02/09
|
▷ |