|
AT84AD001B Datasheet, PDF (1/60 Pages) ATMEL Corporation – Dual 8-bit 1 Gsps ADC | |||
|
Features
⢠Dual ADC with 8-bit Resolution
⢠1 Gsps Sampling Rate per Channel, 2 Gsps in Interlaced Mode
⢠Single or 1:2 Demultiplexed Output
⢠LVDS Output Format (100â¦)
⢠500 mVpp Analog Input (Differential Only)
⢠Differential or Single-ended 50⦠PECL/LVDS Compatible Clock Inputs
⢠Power Supply: 3.3V (Analog), 3.3V (Digital), 2.25V (Output)
⢠LQFP144 Package
⢠Temperature Range:
â 0°C < TA < 70°C (Commercial Grade)
â -40°C < TA < 85°C (Industrial Grade)
⢠3-wire Serial Interface
â 16-bit Data, 3-bit Address
â 1:2 or 1:1 Output Demultiplexer Ratio Selection
â Full or Partial Standby Mode
â Analog Gain (±1.5 dB) Digital Control
â Input Clock Selection
â Analog Input Switch Selection
â Binary or Gray Logical Outputs
â Synchronous Data Ready Reset
â Data Ready Delay Adjustable on Both Channels
â Interlacing Functions:
Offset and Gain (Channel to Channel) Calibration
Digital Fine SDA (Fine Sampling Delay Adjust) on One Channel
â Internal Static or Dynamic Built-In Test (BIT)
Performance
⢠Low Power Consumption: 0.7W Per Channel
⢠Power Consumption in Standby Mode: 120 mW
⢠1.5 GHz Full Power Input Bandwidth (-3 dB)
⢠SNR = 42 dB Typ (6.8 ENOB), THD = -51 dBc, SFDR = -54 dBc at Fs = 1 Gsps
Fin = 500 MHz
⢠2-tone IMD3: -54 dBc (499 MHz, 501 MHz) at 1 Gsps
⢠DNL = 0.25 LSB, INL = 0.5 LSB
⢠Channel to Channel Input Offset Error: 0.5 LSB Max (After Calibration)
⢠Gain Matching (Channel to Channel): 0.5 LSB Max (After Calibration)
⢠Low Bit Error Rate (10-13) at 1 Gsps
Application
⢠Instrumentation
⢠Satellite Receivers
⢠Direct RF Down Conversion
⢠WLAN
Dual 8-bit
1 Gsps ADC
AT84AD001B
Smart ADCâ¢
2153CâBDCâ04/04
1
|
▷ |