|
AT25DQ161_09 Datasheet, PDF (1/64 Pages) ATMEL Corporation – 16-Megabit 2.7-volt Minimum SPI Serial Flash Memory with Dual-I/O and Quad-I/O Support | |||
|
Features
⢠Single 2.7V - 3.6V Supply
⢠Serial Peripheral Interface (SPI) Compatible
â Supports SPI Modes 0 and 3
â Supports RapidS Operation
â Supports Dual- and Quad-Input Program
â Supports Dual- and Quad-Output Read
⢠Very High Operating Frequencies
â 100 MHz for RapidS
â 85 MHz for SPI
â Clock-to-Output (tV) of 5 ns Maximum
⢠Flexible, Optimized Erase Architecture for Code + Data Storage Applications
â Uniform 4-Kbyte Block Erase
â Uniform 32-Kbyte Block Erase
â Uniform 64-Kbyte Block Erase
â Full Chip Erase
⢠Individual Sector Protection with Global Protect/Unprotect Feature
â 32 Sectors of 64-Kbytes Each
⢠Hardware Controlled Locking of Protected Sectors via WP Pin
⢠Sector Lockdown
â Make Any Combination of 64-Kbyte Sectors Permanently Read-Only
⢠128-Byte Programmable OTP Security Register
⢠Flexible Programming
â Byte/Page Program (1 to 256 Bytes)
⢠Fast Program and Erase Times
â 1.0 ms Typical Page Program (256 Bytes) Time
â 50 ms Typical 4-Kbyte Block Erase Time
â 250 ms Typical 32-Kbyte Block Erase Time
â 400 ms Typical 64-Kbyte Block Erase Time
⢠Program and Erase Suspend/Resume
⢠Automatic Checking and Reporting of Erase/Program Failures
⢠Software Controlled Reset
⢠JEDEC Standard Manufacturer and Device ID Read Methodology
⢠Low Power Dissipation
â 5 mA Active Read Current (Typical at 20 MHz)
â 5 µA Deep Power-Down Current (Typical)
⢠Endurance: 100,000 Program/Erase Cycles
⢠Data Retention: 20 Years
⢠Complies with Full Industrial Temperature Range
⢠Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
â 8-lead SOIC (150-mil and 208-mil wide)
â 8-pad Ultra Thin DFN (5 x 6 x 0.6 mm)
16-Megabit
2.7-volt
Minimum
SPI Serial Flash
Memory with
Dual-I/O and
Quad-I/O
Support
AT25DQ161
Preliminary
8671AâDFLASHâ07/09
|
▷ |