SA40-1313 Datasheet, PDF (2/2 Pages) Astec America, Inc – 40 Watts

AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: [phone]
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: [phone]
Facsimile: 44(1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: [phone]
Facsimile: 852-2402-4426
Ordering Information
Model
Number
Output
Voltage
Minimum
Load
Maximum
Load
Peak
Load¹
Regulation² Ripple
P/P (PARD)³
SA40-1313
5V
12 V
-12 V
0.45 A
0.3 A
0A
5A
3A
0.35 A
—
4.5 A
—
+5%, -4%
±5%
±10%
50 mV
120 mV
120 mV
1. Peak current lasting <20 seconds. (Maximum Po = 60 W)
2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10 µF capacitor in parallel with 0.1 µF capacitor at rated line voltage and load ranges.
Pin Assignments
Connector
SA40-1313
SK1-1
SK1-2
SK1-3
Live
Pin removed
Neutral
SK2-1
SK2-2
SK2-3
SK2-4
SK2-5
SK2-6
+12 V
+5 V
+5 V
Common
Common
-12 V
Mating Connectors
AC Input: Molex 09-91-0300
DC Outputs: Molex 09-91-0600
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm).
3. Mounting holes M1, M2 and M3 should be grounded for
EMI purposes.
4. Mounting hole M1 is safety ground connection.
5. Specifications are for convection rating at factory settings
at 115 VAC input, 25°C unless otherwise stated.
6. For safety purposes, on mounting hole M4 use plastic
standoff.
7. Warranty: 1 year
8. Weight: 0.54 lb / 0.25 kg
0.14 (3.5)
M1
3.0
(76.2)
SK 1
3
2.57 2 +
N
(65.2) 1
L
M4
M2
0.156
(4) ^{DIA (3 places)}
SK 2
1
2
3
4
5
6
M3
.022
(5.5)
4.57 (116.0)
5.0 (127.0)
0.22
(5.5)
1.34
0.12
(34.0)
(3)
www.astec.com
89