LPS350 Datasheet, PDF (2/2 Pages) Astec America, Inc – 350 Watts

AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: [phone]
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: [phone]
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Kwai Fong, New Territories
Hong Kong
Telephone: [phone]
Facsimile: 852-2402-4426
Ordering Information
Model
Number
Output
Voltage
Minimum
Load
Maximum Load with
30 CFM Forced Air
Peak
Load1
Regulation2 Ripple
P/P (PARD)3
LPS352-C 5 V (3-6 V)
0A
70 A
80 A
±2%
50 mV
LPS353-C 12 V (6-12 V)
0A
29.2 A
33 A
±2%
120 mV
LPS354-C 15 V (12-24 V)
0A
23.3 A
26 A
±2%
150 mV
LPS355-C 24 V ( 24-48 V) 0 A
14.6 A
16 A
±2%
240 mV
1. Peak current lasting <30 seconds with a maximum 10% duty cycle.
2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. If optional CF or CEF fans are not used, 30CFM forced air cooling needs to be provided and is required through the length of the power
supply. Not convection rated.
5. Output voltage adjustment requires a 1A load.
6. Remote inhibit resets OVP latch.
Note: -CF suffix added to the model number indicates cover with yop fan;
-CEF suffix added to model number indicates end-mounted fan chassis.
Pin Assignments
Connector
SK1
PIN 1
Neutral
PIN 2
Line
PIN 3
Ground
SK3
PIN 1
N/C
PIN 2
N/C
PIN 3
+ Sense
PIN 4
– Sense
PIN 5
POK
PIN 6
C.Share
PIN 7
DC-OK
PIN 8
Inhibit (N.O.)
PIN 9
Inhibit (N.C.)
PIN 10
COM
SK4
PIN 1
+ 5V aux (5V @ 100mA)
PIN 2
– Common
SK5
PIN 1
+Fan 1 (12 V @ 150mA)
PIN 2
– Common
SK6
PIN 1
+ Fan 2 (12V @ 150mA)
PIN 2
– Common
Mating Connectors
SK3
Molex 22-01-1104
PINS:08-70-0057
SK4
Molex 22-01-3027
PINS: 08-50-0114
SK5
Molex 22-01-3027
PINS: 08-50-0114
SK6
Molex 22-01-3027
PINS: 08-50-0114
Astec Connector Kit #70-841-011
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ±.02”.
3. Specifications are at factory settings
4. To enable normally closed Remote Inhibit, cut jumper J1.
5. Mounting maximum insertion depth is 0.12”.
6. Warranty: 1 year
7. Weight: 3.6 lb. / 1.64 kg.
6-32 (2 places)
Main Output
Terminal
Block TB1
+ve -ve
M3 (6 places)
SK3
1234 5 678910
SK6 Fan
J1
SK5 Fan
SK4 (5V aux)
M3 (4 places)
#6-32 UNC (8 places)
.24 (6.1)
3.68
(93.6)
(-CF) 3.15
Cover (80)
with fan
2.17
(55)
5.46
(138.6)
6.64
(168.6)
8.52
(216.4)
9.0
(228.6)
10.78
(273.8)
6-32 (3 places)
321
SK1
5.0 (127.0)
.55
1.30
(14)
(33.0)
Optional
(-CEF)
Cover
with fans
1.18 (30.0)
2.5
(63.5)
3.5
(88.9)
.79
(20)
3.42 (87.0)
www.astecpower.com
129